Dimensions
Clearance at Max Lift and Dump | 8 ft (2 m) |
Ground Clearance | 9 in (23 cm) |
Height – Top of Cab | 6 ft (2 m) |
Length – with Bucket | 11 ft (3 m) |
Length – without Bucket | 9 ft (3 m) |
Reach at Max Lift and Dump | 2 ft (1 m) |
Turning Radius from Center – inc bucket | 80 in (204 cm) |
Turning Radius from Center – machine rear | 58 in (147 cm) |
Width Over Tracks | 6 ft (2 m) |
Engine
Aspiration | turbocharged |
Displacement | 274 cu in (4,490 cu cm) |
Engine Model | Family III 445T/M2 |
Gross Power | 89 hp (66 kw) |
Net Power | 82 hp (61 kw) |
Number of Cylinders | 4 |
Peak Torque | 263 lbs ft (357 nm) |
Power Measured @ | 2300 rpm |
Torque Measured @ | 1400 rpm |
Hydraulic System
Pump Flow | 22 gpm (83 lpm) |
Pump Type | gear pump |
Relief Valve Pressure | 3000 psi |
Loader
Breakout Force | 6,207 lbs (2,815 kg) |
Bucket Capacity | 1 cu yd (1 cu m) |
Operating Load | 3,000 lbs (1,361 kg) |
Tipping Angle | 6000 degrees |
Operating Specifications
Alternator Supplied Amperage | 95 amps |
Cooling System Fluid Capacity | 5 gal (17 l) |
Engine Oil Capacity | 3 gal (12 l) |
Fuel Capacity | 22 gal (83 l) |
Hydraulic System Fluid Capacity | 13 gal (50 l) |
Max Speed – high range | 8 mph (12 kph) |
Max Speed – low range | 5 mph (8 kph) |
Operating Voltage | 12 volts |
Operating Weight | 8,915 lbs (4,044 kg) |
Undercarriage
Ground Contact Area | 1,780 cu in (29,169 cu cm) |
Ground Pressure | 5 psi |
Length of Track on Ground | 5 ft (1 m) |
Number of Track Rollers per Side | 3 |
Track Gauge | 5 ft (1 m) |
Width of Track | 16 in (40 cm) |