Case 450CT Series 3 Compact Track Loader

Dimensions

Clearance at Max Lift and Dump 8 ft (2 m)
Ground Clearance 11 in (29 cm)
Height – Top of Cab 7 ft (2 m)
Length – with Bucket 12 ft (4 m)
Length – without Bucket 9 ft (3 m)
Reach at Max Lift and Dump 3 ft (1 m)
Turning Radius from Center – inc bucket 92 in (234 cm)
Turning Radius from Center – machine rear 60 in (152 cm)
Width Over Tracks 7 ft (2 m)

Engine

Aspiration Turbocharged
Displacement 274 cu in (4,490 cu cm)
Engine Model 445T/M3
Gross Power 90 hp (67 kw)
Net Power 83 hp (62 kw)
Number of Cylinders 4
Peak Torque 288 lbs ft (390 nm)
Power Measured @ 2300 rpm
Torque Measured @ 1300 rpm

Hydraulic System

Pump Flow 22 gpm (83 lpm)
Pump Type Gear

Loader

Bucket Capacity 1 cu yd (1 cu m)
Operating Load 3,857 lbs (1,750 kg)
Tipping Angle 7714 degrees

Operating Specifications

Alternator Supplied Amperage 95 amps
Cooling System Fluid Capacity 3 gal (12 l)
Engine Oil Capacity 3 gal (12 l)
Fuel Capacity 21 gal (78 l)
Hydraulic System Fluid Capacity 17 gal (64 l)
Max Speed – high range 8 mph (13 kph)
Max Speed – low range 5 mph (8 kph)
Operating Voltage 12 volts
Operating Weight 10,925 lbs (4,956 kg)

Undercarriage

Ground Contact Area 2,293 cu in (37,576 cu cm)
Ground Pressure 4.8 psi
Length of Track on Ground 5 ft (2 m)
Number of Track Rollers per Side 4
Width of Track 18 in (45 cm)
Ask A Question