Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 8 in (20 cm) |
| Bucket Pin Height – Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 15 in (37 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 98 in (249 cm) |
| Departure Angle | 38 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – Track on Ground | 70 in (177 cm) |
| Length – with Bucket | 13 ft (4 m) |
| Length – With Bucket on Ground | 150 in (382 cm) |
| Maximum Dump Angle | 51 degrees |
| Maximum Overall Height | 162 in (412 cm) |
| Maximum Reach – With Arms Parallel | 50 in (127 cm) |
| Overall Length – Track | 89 in (227 cm) |
| Rack Back Angle – Maximum Height | 83 degrees |
| Reach at Max Lift and Dump | 3 ft (1 m) |
| Reach at Maximum Lift/Dump | 30 in (76 cm) |
| Turn Radius from Center – Bucket | 91 in (231 cm) |
| Turn Radius from Center – Coupler | 58 in (147 cm) |
| Turn Radius from Center – Rear | 70 in (178 cm) |
| Turning Radius from Center – inc bucket | 91 in (232 cm) |
| Turning Radius from Center – machine rear | 70 in (178 cm) |
| Vehicle Width | 78 in (198 cm) |
| Width Over Tracks | 7 ft (2 m) |
Engine
| Aspiration | Turbocharged |
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Model | Cat C3.4T |
| Gross Power | 94 hp (70 kw) |
| Gross Power – SAE J1995 | 94 hp (70 kw) |
| Net Power | 90 hp (67 kw) |
| Net Power – SAE 1349 | 90 hp (67 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2500 rpm |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow XPS |
| Hydraulic Power | 43 hp (32 kw) |
| Loader Hydraulic Flow | 22 gpm (83 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
| Maximum Loader Hydraulic Pressure | 4061 psi |
| Pump Flow | 22 gpm (84 lpm) |
| Relief Valve Pressure | 3335 psi |
Loader
| Breakout Force | 7,308 lbs (3,315 kg) |
| Bucket Capacity | 1 cu yd (0 cu m) |
| Operating Load | 4,150 lbs (1,882 kg) |
| Tipping Angle | 8338 degrees |
Operating Specifications
| Alternator Supplied Amperage | 90 amps |
| Breakout Force – Tilt Cylinder | 7,308 lbs (3,315 kg) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Engine Oil Capacity | 3 gal (10 l) |
| Fuel Capacity | 26 gal (98 l) |
| Ground Contact Area | 2,504 cu in (41,033 cu cm) |
| Ground Pressure | 4.3 psi |
| Hydraulic System Fluid Capacity | 15 gal (57 l) |
| Max Speed – high range | 9 mph (14 kph) |
| Max Speed – low range | 5 mph (8 kph) |
| Operating Voltage | 12 volts |
| Operating Weight | 10,730 lbs (4,867 kg) |
| Rated Operating Capacities – 35% Tipping Load | 2,905 lbs (1,318 kg) |
| Rated Operating Capacities – 50% Tipping Load | 4,150 lbs (1,882 kg) |
| Rated Operating Capacity with Optional Counterweight | 4,418 lbs (2,004 kg) |
| Tipping Load | 8,338 lbs (3,782 kg) |
Power Train
| Travel Speed Forward | 5 mph (8 kph) |
| Travel Speed Forward – 2-Speed | 9 mph (14 kph) |
| Travel Speed Reverse | 5 mph (8 kph) |
| Travel Speed Reverse – 2-Speed | 9 mph (14 kph) |
Service Refill Capacities
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 26 gal (98 l) |
| Hydraulic System | 15 gal (57 l) |
| Hydraulic Tank | 11 gal (42 l) |
Undercarriage
| Ground Contact Area | 2,504 cu in (41,033 cu cm) |
| Ground Pressure | 4.3 psi |
| Length of Track on Ground | 6 ft (2 m) |
Weights
| Operating Weight | 10,730 lbs (4,867 kg) |
