Caterpillar D3C LGP II Dozer

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 9 ft (3 m)
Length of Track on Ground 7 ft (2 m)
Length w/ Blade 13 ft (4 m)
Length w/o Blade 10 ft (3 m)
Width Over Tracks 8 ft (2 m)

Engine

Displacement 317 cu in (5,201 cu cm)
Engine Model 3204
Gross Power 76 hp (57 kw)
Net Power 70 hp (52 kw)
Number of Cylinders 4
Power Measured @ 2400 rpm

Hydraulic System

Pump Flow Capacity 15 gpm (55 lpm)
Pump type Single-section gear
Relief Valve Pressure 2500 psi

Operating Specifications

Alternator Supplied Amperage 40 amps
Cooling System Fluid Capacity 5 gal (20 l)
Engine Oil Capacity 3 gal (12 l)
Final Drives Fluid Capacity 3 gal (12 l)
Fuel Capacity 32 gal (121 l)
Hydraulic Fluid Capacity 15 gal (57 l)
Operating Voltage 12 volts
Operating Weight 17,170 lbs (7,788 kg)

S-Series

Capacity 2 cu yd (1 cu m)
Displacement 317 cu in (5,201 cu cm)
Engine Model 3204
Fuel Capacity 30 gal (114 l)
Gross Power 70 hp (52 kw)
Ground Clearance 1 ft (0 m)
Ground Contact Area 7,518 cu in (123,192 cu cm)
Ground Pressure 2.5 psi
Height 29 in (74 cm)
Height – Top of Cab 9 ft (3 m)
Length of Track on Ground 8 ft (2 m)
Length w/ Blade 14 ft (4 m)
Length w/o Blade 11 ft (3 m)
Max Speed – Forward 7 mph (11 kph)
Max Speed – Reverse 7 mph (11 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Number of Track Rollers per Side 7
Operating Weight 18,942 lbs (8,592 kg)
Standard Shoe Size 39 in (99 cm)
Track Gauge 7 ft (2 m)
Transmission Type powershift
Width 9 ft (3 m)
Width Over Tracks 10 ft (3 m)

Standard Blade

Blade Angle (both directions) 25 degrees
Capacity 2 cu yd (1 cu m)
Height 30 in (75 cm)
Width 10 ft (3 m)

Transmission

Max Speed – Forward 7 mph (11 kph)
Max Speed – Reverse 7 mph (11 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Transmission Type Planetary powershift

Undercarriage

Ground Contact Area 4,051 cu in (66,384 cu cm)
Ground Pressure 4.1 psi
Number of Shoes per Side 39
Number of Track Rollers per Side 5
Standard Shoe Size 25 in (63 cm)
Track Gauge 6 ft (2 m)
Ask A Question