Contents
Dimensions
| Drawbar Height (Center of Clevis) from Ground Face of Shoes | 25 in (63 cm) |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 11 ft (3 m) |
| Length – Track on Ground | 113 in (288 cm) |
| Length of Track on Ground | 9 ft (3 m) |
| Length w/ Blade | 19 ft (6 m) |
| Length w/o Blade | 16 ft (5 m) |
| Track Gauge | 7 ft (2 m) |
| Width Over Tracks | 8 ft (3 m) |
Engine
| Bore | 5 in (12 cm) |
| Displacement | 629 cu in (10,307 cu cm) |
| Flywheel Power | 240 hp (179 kw) |
| Gross Power | 258 hp (192 kw) |
| Make | Cat |
| Maximum Flywheel Power | 258 hp (192 kw) |
| Model | 3176C |
| Net Power | 240 hp (179 kw) |
| Net Power – Caterpillar | 240 hp (179 kw) |
| Net Power – EU 80/1269 | 240 hp (179 kw) |
| Net Power – ISO 9249 | 240 hp (179 kw) |
| Net Power – SAE J1349 | 238 hp (177 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Stroke | 6 in (14 cm) |
Hydraulic Controls – Pump
| Ripper Cylinder Flow | 48 gpm (180 lpm) |
| Tilt Cylinder Flow | 21 gpm (80 lpm) |
Hydraulic System
| Pump Flow Capacity | 48 gpm (180 lpm) |
| Relief Valve Pressure | 3307 psi |
Operating Specifications
| Alternator Supplied Amperage | 95 amps |
| Cooling System Fluid Capacity | 20 gal (77 l) |
| Engine Oil Capacity | 8 gal (31 l) |
| Final Drives Fluid Capacity | 3 gal (13 l) |
| Fuel Capacity | 127 gal (479 l) |
| Operating Voltage | 24 volts |
Ripper
| Beam Cross Section | 343 x 279 mm 13.5 x 11 in |
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole | 30 in (76 cm) |
| Maximum Penetration | 29 in (75 cm) |
| Maximum Penetration Force | 19,100 lbs (8,664 kg) |
| Number of Pockets | 3 |
| Overall Beam Width | 87 in (221 cm) |
| Pry-Out Force | 38,513 lbs (17,469 kg) |
| Ripper Type | Adjustable Parallelogram |
| Weight – Each Additional Shank | 330 lbs (150 kg) |
| Weight – With One Shank | 7,431 lbs (3,371 kg) |
Service Refill Capacities
| Cooling System | 20 gal (77 l) |
| Engine Crankcase | 8 gal (31 l) |
| Final Drive – Each | 3 gal (13 l) |
| Fuel Tank | 127 gal (479 l) |
| Pivot Shaft Compartment | 1 gal (2 l) |
| Power Train | 47 gal (178 l) |
| Roller Frames – Each | 7 gal (25 l) |
Standard Blade
| Capacity | 9 cu yd (7 cu m) |
| Height | 60 in (152 cm) |
| Width | 12 ft (4 m) |
Transmission
| 1 Forward | 2 mph (4 kph) |
| 1 Reverse | 3 mph (5 kph) |
| 2 Forward | 4 mph (6 kph) |
| 2 Reverse | 5 mph (8 kph) |
| 3 Forward | 7 mph (11 kph) |
| 3 Reverse | 9 mph (14 kph) |
| Max Speed – Forward | 7 mph (11 kph) |
| Max Speed – Reverse | 9 mph (14 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | Hydrostatic |
Undercarriage
| Ground Clearance | 1 ft (0 m) |
| Ground Contact Area | 5,016 cu in (82,198 cu cm) |
| Grouser Height | 3 in (8 cm) |
| Number of Shoes per Side | 40 |
| Number of Track Rollers per Side | 7 |
| Standard Shoe Size | 22 in (56 cm) |
| Track Gauge | 7 ft (2 m) |
| Track Pitch | 9 in (22 cm) |
Winch
| Drum Capacity – 29 mm (1.13 in) | 276 ft (84 m) |
| Drum Diameter | 13 in (32 cm) |
| Drum Width | 13 in (34 cm) |
| Ferrule Size (O.D. Length) | 2.38 in x 2.56 in / 60 mm x 65 mm |
| Flange Diameter | 24 in (61 cm) |
| Increased Tractor Length – LGP | 29 in (74 cm) |
| Increased Tractor Length – STD | 29 in (74 cm) |
| Oil Capacity | 4 gal (15 l) |
| Weight | 4,176 lbs (1,894 kg) |
| Winch and Bracket Length | 58 in (146 cm) |
| Winch Case – Width | 46 in (117 cm) |
