John Deere 1050C Waste Handler Dozer

Dimensions

Ground Clearance 2 ft (1 m)
Height – Top of Cab 12 ft (4 m)
Length of Track on Ground 11 ft (3 m)
Length w/o Blade 16 ft (5 m)
Width Over Tracks 10 ft (3 m)

Engine

Aspiration Intercooled and turbocharged
Displacement 793 cu in (12,995 cu cm)
Engine Model D 9406 TI-E A3
Max Torque 1,129 lbs ft (1,531 nm)
Net Power 324 hp (242 kw)
Number of Cylinders 6
Power Measured @ 1800 rpm
Torque Measured @ 1200 rpm

Hydraulic System

Pump Flow Capacity 89 gpm (337 lpm)
Pump type Variable-displacement piston pump with load-sensing proprotional pump flow control
Relief Valve Pressure 2900 psi

Operating Specifications

Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 18 gal (68 l)
Engine Oil Capacity 6 gal (24 l)
Final Drives Fluid Capacity 6 gal (21 l)
Fuel Capacity 161 gal (609 l)
Hydraulic Fluid Capacity 55 gal (208 l)
Operating Voltage 24 volts
Operating Weight 77,445 lbs (35,129 kg)

Standard Blade

Blade Angle (both directions) 25 degrees
Capacity 28 cu yd (21 cu m)
Height 97 in (245 cm)
Width 14 ft (4 m)

Transmission

Max Speed – Forward 7 mph (11 kph)
Max Speed – Reverse 7 mph (11 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Transmission Type Dual-path, electronic-controlled, closed-loop hydrostatic drive

Undercarriage

Ground Contact Area 6,000 cu in (98,323 cu cm)
Ground Pressure 12.9 psi
Number of Shoes per Side 44
Number of Track Rollers per Side 7
Track Pitch 9 in (22 cm)
Ask A Question