Contents
Blades
Approach angle | 26 degrees |
Blade Height | 17 in (42 cm) |
Blade width | 2,018 mm (79 in) |
Dig depth (below ground) | 2 ft (1 m) |
Maximum height | 2 ft (0 m) |
Reach in front of tracks | 3 ft (1 m) |
Boom
Boom swing left | 60 degrees |
Boom swing right | 60 degrees |
Bucket tearout | 10,701 lbs (4,854 kg) |
Dipper rotation | 118 degrees |
Dipper tearout | 6,879 lbs (3,120 kg) |
Slew speed | 9 rpm |
Boom/Stick Excavator Option 1
Max Digging Reach | 22 ft (7 m) |
Max Reach Along Ground | 21 ft (7 m) |
Max.Dumping Height | 14 ft (4 m) |
Maximum digging depth – dozer down | 13 ft (4 m) |
Maximum digging depth – dozer up | 13 ft (4 m) |
Maximum height to dipper nose pivot pin | 17 ft (5 m) |
Maximum vertical wallcut depth | 10 ft (3 m) |
Minimum front swing radius (fully offset) | 8 ft (2 m) |
Minimum front swing radius (no offset) | 9 ft (3 m) |
Dimensions
Cab height | 61 in (155 cm) |
Ground Clearance | 1 ft (0 m) |
Height – Top of Cab | 9 ft (3 m) |
Overall width of superstructure | 6 ft (2 m) |
Tail Swing Radius | 5 ft (1 m) |
Track Gauge | 5 ft (2 m) |
Transport Height- Minimum | 8,530 ft (2,600 m) |
Transport Length, Minimum | 18,373 ft (5,600 m) |
Width Over Tracks | 7 ft (2 m) |
Engine
Cooling system | Water cooled |
Displacement | 116,128 cu in (1,903,006 cu cm) |
Engine Model | KDI 1903 |
Fuel | Diesel |
Gross Power | 55 hp (41 kw) |
Net Power | 52 hp (38 kw) |
Power Measured @ | 2200 rpm |
Starter Motor | 2 hp (1 kw) |
Torque Measured @ | 1500 rpm |
Hydraulic System
Auxiliary hydraulic flow | 50 gpm (190 lpm) |
Excavator/track main relief | 250 bar |
Hydraulic motor (Travel) | Piston |
Nominal output | 38 gpm (144 lpm) |
Pump Type | 72 cc |
Slew main relief | 216 bar |
Operating Specifications
Cooling System Fluid Capacity | 3 gal (10 l) |
Engine Oil Capacity | 2 gal (8 l) |
Fuel Capacity | 22 gal (83 l) |
Hydraulic Pump Flow Capacity | 15 gpm (58 lpm) |
Hydraulic System Fluid Capacity | 25 gal (93 l) |
Operating Voltage | 12 V |
Operating Weight | 14,553 lbs (6,601 kg) |
Performance
Gradeability | 30% |
Travel speed low | 2 mph (3 kph) |
Travel Speed – High | 3 mph (5 kph) |
Swing Mechanism
Swing Speed | 9.6 rpm |
Undercarriage
Max Travel Speed | 3 mph (4 kph) |
Number of Track Rollers per Side | 4 |
Track tension | Grease |
Tractive Effort | 120 lbs (55 kg) |