Caterpillar 725C2 Articulated Dump Truck

Body Capacities

Heaped (SAE 2:1) 20 cu yd (15 cu m)
Struck 14 cu yd (11 cu m)
Tailgate Heaped SAE 2:1 20 cu yd (16 cu m)
Tailgate Struck 15 cu yd (11 cu m)

Body Hoist

Lower Time 8 seconds
Raise Time 10 seconds

Body Plate

Body Plate Type High strength Brinell HB450 wear resistant steel

Engine

Engine Model – U.S. EPA Tier 4 Final/EU Stage IV Cat C9.3 ACERT
Gross Power – SAE J1995 320 hp (239 kw)
Net Power – ISO 14396 316 hp (236 kw)
Net Power – SAE J1349 314 hp (234 kw)
No Engine De-rating Required Below 7,500 ft (2,286 m)
Peak Engine Torque Gross (SAE J1995) 1,275 lbs ft (1,729 nm)
Peak Engine Torque Net (ISO 14396) 1,262 lbs ft (1,711 nm)
Peak Engine Torque Net (SAE J1349) 1,262 lbs ft (1,711 nm)
Peak Engine Torque Speed 1200 rpm

Operating Weights

Center Axle – Empty 9,755 lbs (4,425 kg)
Center Axle – Loaded 33,455 lbs (15,175 kg)
Center Axle – Rated Load 23,700 lbs (10,750 kg)
Front Axle – Empty 31,835 lbs (14,440 kg)
Front Axle – Loaded 37,374 lbs (16,953 kg)
Front Axle – Rated Load 5,512 lbs (2,500 kg)
Rear Axle – Empty 9,205 lbs (4,175 kg)
Rear Axle – Loaded 32,905 lbs (14,925 kg)
Rear Axle – Rated Load 23,700 lbs (10,750 kg)
Total – Empty 50,795 lbs (23,040 kg)
Total – Loaded 103,707 lbs (47,041 kg)
Total – Rated Load 52,912 lbs (24,001 kg)

Service Refill Capacities

Cooling System 22 gal (83 l)
DEF Tank 5 gal (20 l)
DEF Tank (ISO 2224-1) 5 gal (20 l)
Engine Crankcase 10 gal (38 l)
Final Drives/Differential 33 gal (125 l)
Fuel Tank 109 gal (412 l)
Hydraulic System 29 gal (110 l)
Output Transfer Gear Box 6 gal (24 l)
Transmission 12 gal (47 l)

Sound Levels

Interior Cab 76 dB(A)

Steering System

Lock to Lock 4.75 seconds @ 60 rpm

Transmission

Forward – 1 5 mph (8 kph)
Forward – 2 9 mph (14 kph)
Forward – 3 14 mph (23 kph)
Forward – 4 21 mph (34 kph)
Forward – 5 29 mph (47 kph)
Forward – 6 36 mph (58 kph)
Reverse – 1 6 mph (10 kph)

Turning Circle

Turning Dimensions – Aisle Width 210 in (533 cm)
Turning Dimensions – Clearance Radius 318 in (808 cm)
Turning Dimensions – Inside Radius 153 in (389 cm)
Turning Dimensions – SAE Turning Radius 294 in (747 cm)
Turning Dimensions – Steer Angle – Left/Right 45 degrees

Wheel Base Length

Long Wheel Base 215 in (547 cm)
Standard Wheel Base 157 in (398 cm)
Ask A Question