Contents
Articulating/Rigid
| Articulating/Rigid | Articulated |
Body Plate
| Body Plate Type | High Strength Brinell HB450 Wear Resistant Steel |
Body Plate Thickness
| Base | 0 in (1 cm) |
| Front | 0 in (1 cm) |
| Side | 0 in (1 cm) |
Dimensions
| Dump Ground Clearance | 4 ft (1 m) |
| Ground Clearance | 2 ft (1 m) |
| Overall Height | 12 ft (4 m) |
| Overall Length | 38 ft (12 m) |
| Overall Width | 11 ft (3 m) |
| Wheelbase | 18 ft (6 m) |
DRIVE SYSTEM
| Drive Config | 6×6 |
Dump
| Capacity – Heaped | 36 cu yd (27 cu m) |
| Capacity – Struck | 23 cu yd (18 cu m) |
Ejector Cycle Times
| Eject Time | 14 seconds |
| Retract Time | 24 seconds |
Engine
| Aspiration | Turbocharged |
| Gross Power | 464 hp (346 kw) |
| Make | Cat |
| Model | 3408E ATAAC |
| Net Power | 445 hp (332 kw) |
| Net Power – EEC 80/1269 | 458 hp (342 kw) |
| Net Power – ISO 14396 | 504 hp (376 kw) |
| Net Power – ISO 9249 | 458 hp (342 kw) |
| No Engine De-rating Required Below | 10,000 ft (3,048 m) |
| Number of Cylinders | 6 |
| Peak Engine Torque Gross (SAE J1995) | 1,931 lbs ft (2,618 nm) |
| Peak Engine Torque Net (SAE J1349) | 1,887 lbs ft (2,558 nm) |
| Peak Engine Torque Speed | 1200 rpm |
| Power Measured @ | 1700 rpm |
Operating Specifications
| Cooling System Fluid Capacity | 21 gal (80 l) |
| Engine Oil Capacity | 10 gal (38 l) |
| Fuel Capacity | 148 gal (560 l) |
| Hydraulic System Fluid Capacity | 62 gal (233 l) |
| Tire Size | 29.5R25 |
| Transmission Fluid Capacity | 19 gal (72 l) |
Operating Weights
| Total – Rated Load | 83,776 lbs (38,000 kg) |
Service Refill Capacities
| Axles – Each | 16 gal (60 l) |
| Brake Cooling Tank | 18 gal (67 l) |
| DEF Tank | 5 gal (20 l) |
| Final Drive – Each | 1 gal (5 l) |
| Final Drives/Differential | 61 gal (230 l) |
| Hydraulic System | 87 gal (330 l) |
| Output Transfer Gear Box | 5 gal (18 l) |
| Steering/Hoist Hydraulic System | 37 gal (140 l) |
| Transmission | 19 gal (72 l) |
| Transmission – OTG | 20 gal (75 l) |
Standards
| Cab – FOPS | ISO 3449 Level II 2005 |
| Cab – ROPS | ISO 3471 2008 |
| Steering | ISO 5010 2007 |
Steering System
| Lock to Lock | 4.8 seconds @ 60 rpm |
Transmission
| Forward – 8 | 24 mph (38 kph) |
| Forward – 9 | 34 mph (55 kph) |
| Max Speed | 34 mph (55 kph) |
| Number of Forward Gears | 7 |
| Number of Reverse Gears | 1 |
| Transmission Type | Powershift |
Turning Circle
| Turning Dimensions – Aisle Width | 233 in (592 cm) |
| Turning Dimensions – Clearance Radius | 356 in (904 cm) |
| Turning Dimensions – Inside Radius | 173 in (439 cm) |
| Turning Dimensions – SAE Turning Radius | 339 in (861 cm) |
Weights
| Center Axle – empty | 18,166 lbs (8,240 kg) |
| Center Axle – loaded | 58,246 lbs (26,420 kg) |
| Front Axle – empty | 43,652 lbs (19,800 kg) |
| Front Axle – loaded | 47,267 lbs (21,440 kg) |
| Operating Weight | 157,650 lbs (71,509 kg) |
| Rear Axle – empty | 16,689 lbs (7,570 kg) |
| Rear Axle – loaded | 56,769 lbs (25,750 kg) |
| Total Empty | 78,507 lbs (35,610 kg) |
| Total Loaded | 162,282 lbs (73,610 kg) |
