Caterpillar 740 GC Bare Chassis Articulated Dump Truck

ENGINE

Bore 5 in (14 cm)
Displacement 926 cu in (15,174 cu cm)
Engine Model Cat® C15
Engine Model – U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final Cat® C15
Gross Power – SAE J1995 452 hp (337 kw)
Net Power – ISO 14396 447 hp (333 kw)
Net Power – SAE J1349 439 hp (327 kw)
No Engine De-rating Required Below 10,000 ft (3,048 m)
Peak Engine Torque Gross (SAE J1995) 1,711 lbs ft (2,320 nm)
Peak Engine Torque Net (SAE J1349) 1,670 lbs ft (2,264 nm)
Peak Engine Torque Speed 1200 r/min
Stroke 7 in (17 cm)

SERVICE REFILL CAPACITIES

Axles – Each 16 gal (60 l)
Brake Cooling Tank 18 gal (67 l)
Cooling System 24 gal (90 l)
DEF Tank 25 gal (95 l)
Engine Crankcase 14 gal (52 l)
Final Drive – Each 1 gal (5 l)
Fuel Tank 145 gal (550 l)
Steering/Hoist Hydraulic System 37 gal (140 l)
Transmission – OTG 20 gal (75 l)

SOUND LEVELS

Interior Cab 72 dB(A)

STANDARDS

Brakes ISO 3450:2011
Cab – FOPS ISO 3449:2005 Level II
Cab – ROPS ISO 3471:2008
Steering ISO 5010:2019

STEERING

Lock to Lock 4.75 seconds at 60 rpm

TRANSMISSION

Forward – 1 4 mph (6 kph)
Forward – 2 5 mph (9 kph)
Forward – 3 7 mph (12 kph)
Forward – 4 9 mph (15 kph)
Forward – 5 12 mph (20 kph)
Forward – 6 15 mph (24 kph)
Forward – 7 21 mph (33 kph)
Forward – 8 25 mph (40 kph)
Forward – 9 36 mph (57 kph)
Reverse – 1 4 mph (7 kph)
Reverse – 2 10 mph (16 kph)

TURNING CIRCLE

Note Dimensions are for machines equipped with 29.5 R25 tires.
Turning Dimensions – Aisle Width 220 in (559 cm)
Turning Dimensions – Clearance Radius 330 in (838 cm)
Turning Dimensions – Inside Radius 156 in (396 cm)
Turning Dimensions – SAE Turning Radius 303 in (770 cm)
Turning Dimensions – Steer Angle – Left/Right 45°

WEIGHTS

Rated Payload 49 t (49,200 kg)

WHEEL BASE LENGTH

Standard Wheel Base 162 in (412 cm)
Ask A Question