Contents
Body Capacities
| Heaped (SAE 2:1) | 33 cu yd (25 cu m) |
| Struck | 24 cu yd (19 cu m) |
| Tailgate Heaped SAE 2:1 | 35 cu yd (27 cu m) |
| Tailgate Struck | 26 cu yd (19 cu m) |
Body Hoist
| Lower Time | 8 seconds |
| Raise Time | 12 seconds |
Body Plate
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
Dump
| Capacity – Heaped | 33 cu yd (25 cu m) |
| Capacity – Struck | 24 cu yd (19 cu m) |
| Lower Time | 8 seconds |
| Raise Time | 12 seconds |
Engine
| Bore | 6 in (14 cm) |
| Displacement | 1,106 cu in (18,124 cu cm) |
| Engine Model | Cat C18 ACERT |
| Engine Model – U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | Cat C18 ACERT |
| Gross Power | 511 hp (381 kw) |
| Gross Power – SAE J1995 | 511 hp (381 kw) |
| Net Power | 496 hp (370 kw) |
| Net Power – ISO 14396 | 504 hp (376 kw) |
| Net Power – SAE J1349 | 496 hp (370 kw) |
| No Engine De-rating Required Below | 10,000 ft (3,048 m) |
| Peak Engine Torque Gross (SAE J1995) | 1,931 lbs ft (2,618 nm) |
| Peak Engine Torque Net (SAE J1349) | 1,887 lbs ft (2,558 nm) |
| Peak Engine Torque Speed | 1200 rpm |
| Stroke | 7 in (18 cm) |
| Torque Measured @ | 1200 rpm |
Operating Specifications
| Cooling System Fluid Capacity | 24 gal (90 l) |
| Fuel Capacity | 145 gal (550 l) |
| Hydraulic System Fluid Capacity | 37 gal (140 l) |
| Transmission Fluid Capacity | 20 gal (75 l) |
Operating Weights
| Center Axle – Empty | 15,300 lbs (6,940 kg) |
| Center Axle – Loaded | 53,991 lbs (24,490 kg) |
| Center Axle – Rated Load | 38,691 lbs (17,550 kg) |
| Front Axle – Empty | 43,585 lbs (19,770 kg) |
| Front Axle – Loaded | 56,593 lbs (25,670 kg) |
| Front Axle – Rated Load | 13,007 lbs (5,900 kg) |
| Rear Axle – Empty | 14,749 lbs (6,690 kg) |
| Rear Axle – Loaded | 53,440 lbs (24,240 kg) |
| Rear Axle – Rated Load | 38,691 lbs (17,550 kg) |
| Total – Empty | 73,634 lbs (33,400 kg) |
| Total – Loaded | 164,024 lbs (74,400 kg) |
| Total – Rated Load | 90,389 lbs (41,000 kg) |
Service Refill Capacities
| Axles – Each | 16 gal (60 l) |
| Brake Cooling Tank | 18 gal (67 l) |
| Cooling System | 24 gal (90 l) |
| DEF Tank | 7 gal (25 l) |
| Engine Crankcase | 14 gal (52 l) |
| Final Drive – Each | 1 gal (5 l) |
| Fuel Tank | 145 gal (550 l) |
| Steering/Hoist Hydraulic System | 37 gal (140 l) |
| Transmission – OTG | 20 gal (75 l) |
Sound Levels
| Interior Cab | 79 dB(A) |
Standards
| Brakes | ISO 3450 2011 |
| Cab – FOPS | ISO 3449 Level II 2005 |
| Cab – ROPS | ISO 3471 2008 |
| Steering | ISO 5010 2007 |
Steering System
| Lock to Lock | 4.8 seconds @ 60 rpm |
Transmission
| Forward – 1 | 4 mph (6 kph) |
| Forward – 2 | 5 mph (8 kph) |
| Forward – 3 | 7 mph (11 kph) |
| Forward – 4 | 9 mph (14 kph) |
| Forward – 5 | 12 mph (19 kph) |
| Forward – 6 | 14 mph (23 kph) |
| Forward – 7 | 20 mph (32 kph) |
| Forward – 8 | 24 mph (38 kph) |
| Forward – 9 | 34 mph (55 kph) |
| Number of Forward Gears | 9 |
| Number of Reverse Gears | 2 |
| Reverse – 1 | 4 mph (6 kph) |
| Reverse – 2 | 9 mph (15 kph) |
Turning Circle
| Turning Dimensions – Aisle Width | 235 in (597 cm) |
| Turning Dimensions – Clearance Radius | 358 in (909 cm) |
| Turning Dimensions – Inside Radius | 174 in (442 cm) |
| Turning Dimensions – SAE Turning Radius | 340 in (864 cm) |
Weights
| Center Axle – empty | 15,300 lbs (6,940 kg) |
| Center Axle – loaded | 53,991 lbs (24,490 kg) |
| Front Axle – empty | 43,585 lbs (19,770 kg) |
| Front Axle – loaded | 56,593 lbs (25,670 kg) |
| Rear Axle – empty | 14,749 lbs (6,690 kg) |
| Rear Axle – loaded | 53,440 lbs (24,240 kg) |
| Total Empty | 73,634 lbs (33,400 kg) |
| Total Loaded | 90,389 lbs (41,000 kg) |
Wheel Base Length
| Long Wheel Base | 228 in (580 cm) |
| Standard Wheel Base | 181 in (459 cm) |
