Contents
Articulating/Rigid
Articulating/Rigid | Articulated |
Dimensions
Dump Ground Clearance | 2 ft (1 m) |
Dump Height | 20 ft (6 m) |
Ground Clearance | 1 ft (0 m) |
Overall Height | 12 ft (4 m) |
Overall Length | 32 ft (10 m) |
Overall Width | 10 ft (3 m) |
Wheelbase | 17 ft (5 m) |
DRIVE SYSTEM
Drive Config | 6×6 |
Dump
Capacity – Heaped | 18 cu yd (14 cu m) |
Capacity – Struck | 13 cu yd (10 cu m) |
Dump Angle | 65 degrees |
Lower Time | 7.5 seconds |
Raise Time | 12 seconds |
Rated Payload | 50,710 lbs (23,002 kg) |
Engine
Aspiration | turbocharged |
Displacement | 505 cu in (8,275 cu cm) |
Engine Model | QSC 8.3 |
Gross Power | 280 hp (209 kw) |
Make | Cummins |
Max Torque | 907 lbs ft (1,230 nm) |
Model | QSC 8.3 |
Net Power | 266 hp (198 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1300 rpm |
Operating Specifications
Alternator Supplied Amperage | 70 amps |
Cooling System Fluid Capacity | 15 gal (55 l) |
Engine Oil Capacity | 5 gal (20 l) |
Fuel Capacity | 103 gal (390 l) |
Hydraulic System Fluid Capacity | 53 gal (202 l) |
Operating Voltage | 24 volts |
Tire Size | 23.5R25 |
Transmission Fluid Capacity | 14 gal (54 l) |
Transmission
Max Speed | 32 mph (52 kph) |
Number of Forward Gears | 6 |
Number of Reverse Gears | 3 |
Transmission Type | ZF 6WG 210 |
Weights
Center Axle – empty | 10,890 lbs (4,940 kg) |
Center Axle – loaded | 32,100 lbs (14,560 kg) |
Front Axle – empty | 24,050 lbs (10,909 kg) |
Front Axle – loaded | 32,210 lbs (14,610 kg) |
Operating Weight | 96,720 lbs (43,872 kg) |
Rear Axle – empty | 11,070 lbs (5,021 kg) |
Rear Axle – loaded | 32,410 lbs (14,701 kg) |
Total Empty | 46,010 lbs (20,870 kg) |
Total Loaded | 96,720 lbs (43,872 kg) |