Contents
Approximate Weights – Dual Slope
Body | 34,785 lbs (15,778 kg) |
Chassis | 106,964 lbs (48,518 kg) |
Approximate Weights – Flat Floor
Body | 1,300 lbs (590 kg) |
Body Hoists
Body Lower Time – Float | 13 seconds |
Body Raise Time – High Idle | 15 seconds |
Pump Flow – High Idle | 119 gpm (450 lpm) |
Relief Valve Setting – Raise | 2750 psi |
Brakes
Brake Surface – Rear | 15,828 cu in (259,375 cu cm) |
Standards | 2.74:1 |
Capacity – Dual Slope – 100% Fill Factor
Heaped 2:1 (SAE) | 79 cu yd (60 cu m) |
Capacity – Flat Floor – 100% Fill Factor
Heaped 2:1 (SAE) | SAE J1040 MAY94, ISO 3471:1997 cu yd |
Dimensions
Centerline Front Tire Width | 14 ft (4 m) |
Dump Ground Clearance | 3 ft (1 m) |
Dump Height | 33 ft (10 m) |
Front Canopy Height | 17 ft (5 m) |
Ground Clearance | 3 ft (1 m) |
Inside Body Length | 24 ft (7 m) |
Loading Height – Empty | 14 ft (4 m) |
Operating Width | 20 ft (6 m) |
Overall Height | 17 ft (5 m) |
Overall Height – Body Raised | 33 ft (10 m) |
Overall Length | 32 ft (10 m) |
Overall Width | 20 ft (6 m) |
Wheel Base | 15 ft (5 m) |
Wheelbase | 15 ft (5 m) |
Dump
Dump Angle | 1750 |
Load Capacity – heaped | 79 cu yd (61 cu m) |
Load Capacity – Struck | 55 cu yd (42 cu m) |
Raise Time | 15 seconds |
Rated Payload | 200,000 lbs (90,719 kg) |
Engine
Bore | 7 in (17 cm) |
Displacement | 2,105 cu in (34,495 cu cm) |
Engine Model | Cat 3508B EUI |
Flywheel Power | 938 hp (699 kw) |
Gross Power | 1,000 hp (746 kw) |
Gross Power – SAE J1995 | 1,000 hp (746 kw) |
Max Torque | 3,476 lbs ft (4,713 nm) |
Net Power | 938 hp (699 kw) |
Net Power – 80/1269/EEC | 938 hp (699 kw) |
Net Power – Cat | 938 hp (699 kw) |
Net Power – ISO 9249 | 938 hp (699 kw) |
Net Power – SAE J1349 | 938 hp (699 kw) |
Number of Cylinders | 8 |
Stroke | 8 in (19 cm) |
Torque Measured @ | 1300 rpm |
Final Drives
Planetary Ratio | 7.00:1 |
Total Reduction Ratio | 19.16:1 |
Operating Specifications
Alternator Supplied Amperage | automatic power shift |
Body Capacity – SAE 2:1 | 79 cu yd (60 cu m) |
Body Capacity – Struck | 55 cu yd (42 cu m) |
Brake/Hoist System Fluid Capacity | 110 gal (415 l) |
Circle Clearance Diameter | 86 ft (26 m) |
Cooling System Fluid Capacity | 86 gal (325 l) |
Diff and Final Drive Fluid Capacity | 87 gal (329 l) |
Engine Oil Capacity | 33 gal (124 l) |
Fuel Capacity | 300 gal (1,137 l) |
Lower Time | 14 seconds |
Maximum Capacity | 178,920 lbs (81,157 kg) |
Nominal Payload Capacity | 87 lbs (39 kg) |
Nominal Payload Class (100%) | 178,920 lbs (81,157 kg) |
Raise Time | 15 seconds |
Steer Angle | 31.8 degrees |
Steering System Fluid Capacity | 22 gal (84 l) |
Top Speed – Loaded | 40 mph (64 kph) |
ROPS
ROPS Standards | ANSI/SAE J1166 MAY90, SAE J88 JUN96 |
Service Refill Capacities
Brake Hoist System – Includes Tank | 110 gal (415 l) |
Brake/Hoist Hydraulic Tank | 200,000 gal (757,000 l) |
Cooling System | 86 gal (326 l) |
Differential – Final Drives | 87 gal (329 l) |
Fuel Tank | 300 gal (1,136 l) |
Steering System – Including Tank | 22 gal (83 l) |
Steering Tank | 15 gal (57 l) |
Torque Converter – Brake – Hoist Hydraulic Tank | 66 gal (250 l) |
Torque Converter – Transmission Sump | 107,100 gal (405,374 l) |
Torque Converter – Transmission System – Including Sump | 37 gal (138 l) |
Sound
Sound Standards | ANSI/SAE J1166 MAY90, SAE J88 JUN96 |
Steering System
Steer Angle | 31.8 degrees |
Steering Standards | SAE J1511 OCT90, ISO 5010:1992 (E) |
Turning Circle – Clearance Diameter | ISO 3450: 1996, SAE J1473 OCT90 ft |
Tires
Standard Tire | 27.00-R49 (E4) |
Standard Tires | 432 |
Transmission
Forward – 1 | 7 mph (10 kph) |
Forward – 2 | 9 mph (14 kph) |
Forward – 3 | 12 mph (19 kph) |
Forward – 4 | 16 mph (26 kph) |
Forward – 5 | 22 mph (35 kph) |
Forward – 6 | 29 mph (47 kph) |
Forward – 7 | 40 mph (64 kph) |
Max Speed | 38 mph (61 kph) |
Number of Gears – Forward | 7 |
Number of Gears – Reverse | 1 |
Reverse | 7 mph (12 kph) |
Weights
Chassis Weight | 107,100 lbs (48,580 kg) |
Empty Weight | 155,000 lbs (70,307 kg) |
Front Axle – Empty | 47% |
Front Axle – Loaded | 33% |
Loaded Weight | 355,011 lbs (161,030 kg) |
Rear Axle – Empty | 53% |
Rear Axle – Loaded | 67% |
Weight Distribution Front – empty | 45.4% |
Weight Distribution Front – loaded | 33.3% |
Weight Distribution Rear – empty | 54.6% |
Weight Distribution Rear – loaded | 66.7% |