Contents
Articulating/Rigid
| Articulating/Rigid | Rigid |
Body Hoists
| Body Lower Time – Float | 20 seconds |
| Body Raise Time – High Idle | 19 seconds |
| Pump Flow – High Idle | 224 gpm (848 lpm) |
| Relief Valve Setting – Raise | 2955 psi |
DRIVE SYSTEM
| Drive Config | 2WD |
Dump
| Rated Payload | 227 t (227,000 kg) |
Engine
| Bore | 7 in (18 cm) |
| Displacement | 5,187 cu in (85,000 cu cm) |
| Engine Model | Cat C175-16 |
| Gross Power – SAE J1995 | 2,650 hp (1,976 kw) |
| Make | Cat |
| Model | C175-16 |
| Net Power | 2,478 hp (1,848 kw) |
| Net Power – SAE J1349 | 2,478 hp (1,848 kw) |
| Stroke | 9 in (22 cm) |
| Torque Rise | 17.5 |
Final Drives
| Planetary Ratio | 0.667361111111111 |
Operating Specifications
| Nominal Payload Capacity | 500,000 lbs (226,796 kg) |
| Top Speed – Loaded | 37 mph (60 kph) |
| Turning Diameter – Front | 107 ft (33 m) |
Service Refill Capacities
| Brake Hoist System – Includes Tank | 347 gal (1,313 l) |
| Cooling System | 284 gal (1,075 l) |
| Crankcase | 82 gal (310 l) |
| Differential – Final Drives | 82 gal (310 l) |
| Fuel Tank | 750 gal (2,839 l) |
| Fuel Tank – Standard | 1,300 gal (4,921 l) |
| Steering System – Including Tank | 77 gal (291 l) |
Sound
| Sound Standards | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
Steering System
| Steering Standards | SAE J15111 OCT90, ISO 5010:1992 |
Suspension
| Rear axle – Oscillation | 5.1 degrees |
Tires
| Standard Tires | 13921 |
Transmission
| Forward – 1 | 8 mph (13 kph) |
| Forward – 2 | 11 mph (17 kph) |
| Forward – 3 | 15 mph (24 kph) |
| Forward – 4 | 20 mph (32 kph) |
| Forward – 5 | 27 mph (44 kph) |
| Forward – 6 | 37 mph (60 kph) |
| Reverse | 7 mph (12 kph) |
Weights
| Body Weight Range | 26 862-47 627 kg (59,220-105,000 lb) |
| Chassis Weight | 270,000 lbs (122,470 kg) |
| Front Axle – Empty | 48% |
| Front Axle – Loaded | 33% |
| Gross Machine Operating Weight (GMW) | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. lbs |
| Operating Weight | 851,000 lbs (386,008 kg) |
| Operating Weight – Loaded | SAE J15111 OCT90, ISO 5010:1992 lbs |
| Rear Axle – Empty | 52% |
| Rear Axle – Loaded | 67% |
