John Deere 950C Dozer

Dimensions

Ground Clearance 2 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Length of Track on Ground 10 ft (3 m)
Length w/ Blade 19 ft (6 m)
Length w/o Blade 14 ft (4 m)
Width Over Tracks 8 ft (2 m)

Engine

Aspiration Intercooled and turbocharged
Displacement 610 cu in (9,996 cu cm)
Engine Model D926 TI
Max Torque 797 lbs ft (1,081 nm)
Net Power 230 hp (172 kw)
Number of Cylinders 6
Power Measured @ 1800 rpm
Torque Measured @ 1300 rpm

Hydraulic System

Pump Flow Capacity 77 gpm (291 lpm)
Pump type Variable-displacement piston pump with load-sensing proportional pump flow control
Relief Valve Pressure 2320 psi

Operating Specifications

Alternator Supplied Amperage 55 amps
Cooling System Fluid Capacity 18 gal (67 l)
Engine Oil Capacity 7 gal (25 l)
Final Drives Fluid Capacity 4 gal (14 l)
Fuel Capacity 119 gal (450 l)
Hydraulic Fluid Capacity 47 gal (178 l)
Operating Voltage 24 volts
Operating Weight 50,600 lbs (22,952 kg)

Standard Blade

Blade Angle (both directions) 25 degrees
Capacity 10 cu yd (7 cu m)
Height 57 in (145 cm)
Width 13 ft (4 m)

Transmission

Max Speed – Forward 7 mph (11 kph)
Max Speed – Reverse 7 mph (11 kph)
Number of Forward Gears 3
Number of Reverse Gears 3
Transmission Type Dual-path, electronic-controlled, closed-loop hydrostatic drive

Undercarriage

Ground Contact Area 4,680 cu in (76,692 cu cm)
Ground Pressure 10.9 psi
Number of Shoes per Side 39
Number of Track Rollers per Side 7
Standard Shoe Size 20 in (51 cm)
Track Gauge 7 ft (2 m)
Track Pitch 9 in (22 cm)
Ask A Question