Case 721C Wheel Loader

Bucket

Breakout Force 35,005 lbs (15,878 kg)
Bucket Capacity – heaped 3 cu yd (2 cu m)
Bucket Capacity – struck 2 cu yd (2 cu m)
Bucket Width 9 ft (3 m)
Dump Clearance at Max Raise 10 ft (3 m)

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length with Bucket on Ground 23 ft (7 m)
Reach at Max Lift and Dump 3 ft (1 m)
Wheelbase 10 ft (3 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration turbocharged
Displacement 504 cu in (8,259 cu cm)
Engine Model 6T-830
Gross Power 165 hp (123 kw)
Net Power 152 hp (113 kw)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1300 rpm
Torque Rise 41%

Hydraulic System

Dump Time 1.8 seconds
Lower Time 5.1 seconds
Pump Flow Capacity 19 gpm (70 lpm)
Pump Type dual, vane-type tandem
Raise Time 5.4 seconds
Relief Valve Setting 2775 psi

Operating Specifications

Alternator Supplied Amperage 65 amps
Cooling System Fluid Capacity 9 gal (33 l)
Engine Oil Fluid Capacity 6 gal (21 l)
Front Axle/Diff Fluid Capacity 7 gal (28 l)
Fuel Capacity 54 gal (204 l)
Hydraulic System Fluid Capacity 41 gal (153 l)
Operating Voltage 24 volts
Operating Weight 29,630 lbs (13,440 kg)
Rear Axle Oscillation 24 degrees
Rear Axle/Diff Fluid Capacity 6 gal (22 l)
Static Tipping Weight 23,221 lbs (10,533 kg)
Tire Size 20.5-25 L3
Transmission Fluid Capacity 3 gal (12 l)
Turning Radius 17 ft (5 m)

Transmission

Max Speed – Forward 24 mph (39 kph)
Max Speed – Reverse 17 mph (28 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Ask A Question