Case 821E Wheel Loader

Bucket

Breakout Force 34,416 lbs (15,611 kg)
Bucket Capacity – heaped 5 cu yd (3 cu m)
Bucket Capacity – struck 4 cu yd (3 cu m)
Bucket Width 10 ft (3 m)
Dump Clearance at Max Raise 10 ft (3 m)

Dimensions

Ground Clearance 1 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Hinge Pin – Max Height 14 ft (4 m)
Length with Bucket on Ground 26 ft (8 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheelbase 11 ft (3 m)
Width Over Tires 10 ft (3 m)

Engine

Aspiration Turbocharged and Aftercooled
Displacement 411 cu in (6,735 cu cm)
Engine Model Family IV, 667TA/EBD Tier III Certified
Gross Power 210 hp (157 kw)
Make Case
Model Family IV 667TA/EED Tier 3
Net Power 198 hp (148 kw)
Number of Cylinders 6
Power Measured @ 1800 rpm
Torque Measured @ 1400 rpm

Hydraulic System

Dump Time 1.2 seconds
Lower Time 2.8 seconds
Pump Flow Capacity 32 gpm (120 lpm)
Pump Type closed centered pressure/flow compensated
Raise Time 5.6 seconds
Relief Valve Setting 3600 psi

Operating Specifications

Alternator Supplied Amperage 70 amps
Cooling System Fluid Capacity 111 gal (419 l)
Engine Oil Fluid Capacity 6 gal (21 l)
Front Axle/Diff Fluid Capacity 10 gal (37 l)
Fuel Capacity 76 gal (288 l)
Hydraulic System Fluid Capacity 46 gal (174 l)
Operating Voltage 24 volts
Operating Weight 37,844 lbs (17,166 kg)
Rated Bucket Capacity 4 cu yd (3 cu m)
Rear Axle Oscillation 24 degrees
Rear Axle/Diff Fluid Capacity 6 gal (24 l)
Static Tipping Weight 31,376 lbs (14,232 kg)
Tire Size 23.5 x 25 l2 bias
Transmission Fluid Capacity 11 gal (40 l)
Turning Radius 20 ft (6 m)

Transmission

Max Speed – Forward 23 mph (37 kph)
Max Speed – Reverse 16 mph (25 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type 4F/3R Proportional w/Electronic Control Module

Weights

Operational Weight 37,844 lbs (17,166 kg)
Ask A Question