Contents
Axles
| Front | Fixed |
| Maximum Single-Wheel Rise and Fall | 22 in (57 cm) |
| Rear | Oscillating 13 degrees |
Bucket
| Breakout Force | 85,068 lbs (38,586 kg) |
| Bucket Capacities | 10 cu yd (8 cu m) |
| Bucket Capacity – heaped | 8 cu yd (6 cu m) |
| Bucket Capacity – struck | 7 cu yd (5 cu m) |
| Bucket Width | 13 ft (4 m) |
| Maximum Bucket Capacity | 10 cu yd (8 cu m) |
Cab
| Cab – ROPS/FOPS | Meets SAE and ISO standards |
| Sound Performance | Meets ANSI, SAE and ISO standards |
Dimensions
| Height – Top of Cab | 14 ft (4 m) |
| Height – Top of Exhaust | 14 ft (4 m) |
| Hinge Pin – Max Height | 19 ft (6 m) |
| Length with Bucket on Ground | 40 ft (12 m) |
| Reach at Max Lift and Dump | 7 ft (2 m) |
| Wheel Base Length | 15 ft (5 m) |
| Wheelbase | 15 ft (5 m) |
| Width Over Tires | 12 ft (4 m) |
Engine
| Bore | 6 in (14 cm) |
| Displacement | 1,105 cu in (18,100 cu cm) |
| Engine Model | Cat C18 ACERT |
| Flywheel Power | 501 hp (374 kw) |
| Gross Power | 555 hp (414 kw) |
| Gross Power – ISO 3046-2 | 520 hp (388 kw) |
| Make | Cat |
| Net Power – EEC 80/1269 | 501 hp (374 kw) |
| Net Power – ISO 9249 | 501 hp (374 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1800 rpm |
| Stroke | 7 in (18 cm) |
Hydraulic Cycle Times
| Dump | 2.4 seconds |
| Raise | 9.4 seconds |
| Total Hydraulic Cycle Time | 15.6 seconds |
Hydraulic System
| Dump Time | 2.4 seconds |
| Lower Time | 3.8 seconds |
| Pump Flow Capacity | 130 gpm (492 lpm) |
| Raise Time | 9.4 seconds |
| Relief Valve Setting | 4500 psi |
Loader Hydraulic System
| Relief Valve Setting | 5075 psi |
| Relief Valve Setting – Low Idle | 348.1 psi |
Operating Specifications
| Alternator Supplied Amperage | 100 amps |
| Cooling System Fluid Capacity | 27 gal (103 l) |
| Engine Oil Fluid Capacity | 16 gal (60 l) |
| Front Axle/Diff Fluid Capacity | 49 gal (185 l) |
| Fuel Capacity | 188 gal (712 l) |
| Hinge Pin Height, Unloaded | 16 ft (5 m) |
| Hydraulic System Fluid Capacity | 71 gal (267 l) |
| Operating Voltage | 24 volts |
| Rated Payload | 27,558 lbs (12,500 kg) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 49 gal (185 l) |
| Static Tipping Weight | 76,776 lbs (34,825 kg) |
| Tire Size | 35/65 |
| Transmission Fluid Capacity | 19 gal (70 l) |
| Turning Radius | 28 ft (9 m) |
Service Refill Capacities
| Cooling System | 27 gal (103 l) |
| Crankcase | 16 gal (60 l) |
| Differential – Final Drives – Front | 49 gal (185 l) |
| Differential – Final Drives – Rear | 49 gal (185 l) |
| Fuel Tank | 188 gal (712 l) |
| Hydraulic System – Tank Only | 71 gal (267 l) |
| Hydraulic System Factory Fill | 124 gal (470 l) |
| Transmission | 19 gal (70 l) |
Steering System
| Steering | Meets SAE and ISO standards |
Transmission
| Converter Drive – Forward 1 | 4 mph (7 kph) |
| Converter Drive – Forward 2 | 7 mph (12 kph) |
| Converter Drive – Forward 3 | 13 mph (21 kph) |
| Converter Drive – Reverse 1 | 5 mph (8 kph) |
| Converter Drive – Reverse 2 | 8 mph (14 kph) |
| Converter Drive – Reverse 3 | 15 mph (24 kph) |
| Direct Drive – Forward 2 | 8 mph (12 kph) |
| Direct Drive – Forward 3 | 14 mph (22 kph) |
| Direct Drive – Forward 4 | 24 mph (39 kph) |
| Direct Drive – Reverse 1 | 5 mph (8 kph) |
| Direct Drive – Reverse 2 | 9 mph (14 kph) |
| Direct Drive – Reverse 3 | 16 mph (25 kph) |
| Max Speed – Forward | 24 mph (39 kph) |
| Max Speed – Reverse | 16 mph (25 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
Weights
| Operating Weight | 128,328 lbs (58,209 kg) |
