Caterpillar 990K Wheel Loader

Axles

Front Fixed
Oscillation Angle 8.5 degrees
Rear Trunnion

Brakes

Brakes SAE J1473 OCT90, ISO 3450:1992

Engine

Bore 5 in (14 cm)
Displacement 1,650 cu in (27,031 cu cm)
Engine Model Cat C27 ACERT
Gross – ISO 14396 752 hp (561 kw)
Make Cat
Model C27 ACERT
Net Power 699 hp (521 kw)
Net Power – SAE J1349 699 hp (521 kw)
Peak Torque – 1,200 rpm 2,624 lbs ft (3,558 nm)
Rated Speed 1800 rpm
Stroke 6 in (15 cm)
Torque Rise 18%

Hydraulic Cycle Times

Dump 2.9 seconds
Lower 3.7 seconds
Lower Float Down 3.6 seconds

Hydraulic System – Lift/Tilt

Lift/Tilt System Variable displacement piston
Lift/Tilt System – Circuit Positive flow control
Pilot System Open loop and pressure reducing
Relief Valve Setting 507 psi
Relief Valve Setting – Lift/Tilt 4786 psi

Hydraulic System – Steering

Relief Valve Setting – Steering 4641 psi
Steering System – Circuit Pilot, load sensing
Steering System – Pump Piston, variable displacement

Operating Specifications

Cat Truck Match – High Lift 775-777
Cat Truck Match – Standard 773-775
Rated Payload 38,581 lbs (17,500 kg)
Rated Payload – High Lift 35,000 lbs (15,876 kg)
Tipping Load – Straight 92,990 lbs (42,180 kg)

Service Refill Capacities

Cooling System 55 gal (208 l)
Differential – Final Drives – Front 72 gal (271 l)
Differential – Final Drives – Rear 69 gal (261 l)
Engine Crankcase 20 gal (76 l)
Fuel Tank 294 gal (1,114 l)
Hydraulic System Factory Fill 210 gal (795 l)
Transmission 29 gal (110 l)

Transmission

Direct Drive – Forward 1 Lock-up disabled
Direct Drive – Forward 2 9 mph (14 kph)
Direct Drive – Forward 3 15 mph (24 kph)
Direct Drive – Reverse 1 5 mph (9 kph)
Direct Drive – Reverse 2 10 mph (15 kph)
Direct Drive – Reverse 3 16 mph (26 kph)
Forward – 1 5 mph (7 kph)
Forward – 2 8 mph (13 kph)
Forward – 3 14 mph (23 kph)
Reverse – 1 5 mph (8 kph)
Reverse – 2 9 mph (15 kph)
Reverse – 3 16 mph (25 kph)
Transmission Type Cat planetary power shift
Ask A Question