Case 845 DHP Motor Grader

Circle

Diameter 69 in (175 cm)
Max Lift Above Ground 18 in (44 cm)
Rotation 360 degrees

Dimensions

Blade Base 9 ft (3 m)
Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Length 28 ft (9 m)
Rear Ground Clearance 1 ft (0 m)
Tandem Axle Wheelbase 5 ft (2 m)
Wheelbase 21 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration turbocharged and air to air aftercooled
Displacement 411 cu in (6,735 cu cm)
Engine Model QSB 6.7, Tier III certified electronic controlled
Max Power 160 hp (119 kw)
Net Power Gears 7-8 160 hp (119 kw)
Net Torque Gears 7-8 550 lbs ft (746 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1500 rpm

Front Axle

Oscillation – Total 19 degrees
Wheel Lean 17.5 degrees

Hydraulic System

Pump Flow 51 gpm (191 lpm)
Pump Type Closed center, load sensing, gear pump.

Moldboard

Max Depth of Cut 28 in (71 cm)
Moldboard Height 22 in (56 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 21 in (53 cm)
Side Shift Right 27 in (69 cm)

Operating Specifications

Alternator Supplied Amperage 80 amps
Circle Gearbox Fluid Capacity 1 gal (3 l)
Cooling System Fluid Capacity 11 gal (40 l)
Fuel Capacity 90 gal (341 l)
Hydraulic System Fluid Capacity 48 gal (180 l)
Oil System Fluid Capacity 4 gal (16 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 3 gal (12 l)
Std Operation Weight – Front Axle 8,155 lbs (3,699 kg)
Std Operation Weight – Rear Axle 21,621 lbs (9,807 kg)
Std Operation Weight – Total 29,777 lbs (13,507 kg)
Tandem Case Fluid Capacity (each) 8 gal (29 l)
Tire Size 14.0 x 24 12PR TL G2 Firestone
Transmission Fluid Capacity 7 gal (25 l)

Steering System

Articulation Angle 25 degrees
Turning Radius 24 ft (7 m)

Transmission

Max Speed – Forward 27 mph (43 kph)
Max Speed – Reverse 18 mph (28 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Direct drive countershaft powershift w/ electronic shift control and inching pedal
Ask A Question