Case 865B VHP Motor Grader

Circle

Diameter 69 in (175 cm)
Max Lift Above Ground 18 in (44 cm)
Rotation 360 degrees

Dimensions

Blade Base 9 ft (3 m)
Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Height with cab 10 ft (3 m)
Overall Length 28 ft (9 m)
Rear Ground Clearance 1 ft (0 m)
Tandem Axle Wheelbase 5 ft (2 m)
Wheelbase 21 ft (6 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration Turbocharged with air to air cooler
Displacement 409 cu in (6,702 cu cm)
Engine Model FPT F4HE9687C
Net Power Gears 7-8 205 hp (153 kw)
Net Torque Gears 7-8 686 lbs ft (930 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1500 rpm

Front Axle

Oscillation – Total 15.3 degrees
Wheel Lean 20 degrees

Hydraulic System

Pump Flow 49 gpm (185 lpm)
Pump Type load sensing piston

Moldboard

Blade Down Pressure 20,626 lbs (9,356 kg)
Max Depth of Cut 28 in (71 cm)
Moldboard Height 24 in (60 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 14 ft (4 m)
Side Shift Left 21 in (53 cm)
Side Shift Right 27 in (69 cm)

Operating Specifications

Alternator Supplied Amperage 90 amps
Circle Gearbox Fluid Capacity 1 gal (3 l)
Cooling System Fluid Capacity 11 gal (40 l)
Fuel Capacity 90 gal (341 l)
Hydraulic System Fluid Capacity 50 gal (190 l)
Oil System Fluid Capacity 19 gal (70 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 12 gal (44 l)
Std Operation Weight – Front Axle 12,129 lbs (5,502 kg)
Std Operation Weight – Rear Axle 23,864 lbs (10,825 kg)
Std Operation Weight – Total 35,993 lbs (16,326 kg)
Tandem Case Fluid Capacity (each) 16 gal (60 l)
Tire Size 17.5-25
Transmission Fluid Capacity 25 gal (95 l)

Steering System

Articulation Angle 25 degrees
Turning Radius 24 ft (7 m)

Transmission

Max Speed – Forward 27 mph (43 kph)
Max Speed – Reverse 18 mph (28 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Powershift
Ask A Question