Contents
Blades
| Blade Tip Range – Backward | 5 degrees |
| Blade Tip Range – Forward | 40 degrees |
| Circle Centershift – Left | 26 in (66 cm) |
| Circle Centershift – Right | 26 in (66 cm) |
| Maximum Blade Position Angle | 90 degrees |
| Maximum Depth of Cut | 28 in (72 cm) |
| Maximum Lift Above Ground | 17 in (43 cm) |
| Maximum Shoulder Reach Outside of Tires – Left | 69 in (174 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 75 in (190 cm) |
| Moldboard Sideshift – Left | 20 in (51 cm) |
| Moldboard Sideshift – Right | 26 in (66 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 60 in (153 cm) |
| Max Lift Above Ground | 17 in (43 cm) |
| Max Reach Outside Tires – Left | 69 in (174 cm) |
| Max Reach Outside Tires – Right | 75 in (190 cm) |
| Shift Left | 26 in (66 cm) |
| Shift Right | 26 in (66 cm) |
Dimensions
| Blade Base | 8 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Ground Clearance – Rear Axle | 14 in (35 cm) |
| Height – Exhaust Stack | 112 in (285 cm) |
| Height – Front Axle Center | 23 in (57 cm) |
| Height – Top of Cab | 11 ft (3 m) |
| Height – Top of Cylinders | 114 in (289 cm) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Length – Between Tandem Axles | 60 in (151 cm) |
| Length – Counterweight to Ripper | 389 in (989 cm) |
| Length – Front Axle to Mid Tandem | 233 in (591 cm) |
| Length – Front Axle to Moldboard | 99 in (251 cm) |
| Length – Front Tire to Rear of Machine | 334 in (849 cm) |
| Overall Length | 28 ft (9 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 19 ft (6 m) |
| Width – Outside Front Tires | 98 in (248 cm) |
| Width – Outside Rear Tires | 98 in (248 cm) |
| Width – Tire Center Lines | 84 in (214 cm) |
| Width Over Tires | 8 ft (2 m) |
Engine
| Base Power (1st Gear) – Net | 138 hp (103 kw) |
| Base Power (1st Gear) – Net – Metric | 140 hp (104 kw) |
| Base Power (All Gears) – Net | 138 hp (103 kw) |
| Bore | 4 in (11 cm) |
| Derating Altitude | 11,500 ft (3,505 m) |
| Displacement | 403 cu in (6,604 cu cm) |
| Emissions | U.S. EPA Tier 3/EU Stage IIIA equivalent |
| Engine Model | Cat C6.6 ACERT |
| High – Ambient Capability | 122 degrees |
| High Ambient – Fan Speed – Maximum | 1,650 rpm |
| High Ambient – Fan Speed – Minimum | 600 rpm |
| Max Power | 138 hp (103 kw) |
| Maximum Torque | 690 lbs ft (936 nm) |
| Net Power Gears 7-8 | 138 hp (103 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Speed at Rated Power | 2,000 rpm |
| Standard – Ambient Capability | 109 degrees |
| Standard – Fan Speed – Maximum | 1,150 rpm |
| Standard – Fan Speed – Minimum | 600 rpm |
| Stroke | 5 in (13 cm) |
| Torque Rise – VHP Plus | 40% |
| VHP Plus Range – Net | 103-136 kW (138-182) |
| VHP Plus Range – Net – Metric | 103-136 kW (140-185) |
| VHP Range – Net | 103-114 kW (138-153) |
Frame
| Circle – Blade Beam Thickness | 1 in (4 cm) |
| Circle – Diameter | 60 in (153 cm) |
| Drawbar – Height | 6 in (15 cm) |
| Drawbar – Thickness | 0 in (1 cm) |
| Drawbar – Width | 3 in (8 cm) |
| Front Axle – Height to Center | 23 in (57 cm) |
| Front Axle – Total Oscillation per Side | 32 degrees |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
| Front Frame Structure – Height | 1 ft (0 m) |
| Front Frame Structure – Width | 1 ft (0 m) |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum System Pressure | 3500 psi |
| Pump Flow | 40 gpm (151 lpm) |
| Pump Output | 40 gpm (151 lpm) |
| Pump Type | Variable piston |
| Relief Valve Pressure | 3500 psi |
| Standby Pressure | 450 psi |
Moldboard
| Arc Radius | 16 in (41 cm) |
| Blade Down Pressure | 28,887 lbs (13,103 kg) |
| Blade Down Pressure – Base GVW | 16,435 lbs (7,455 kg) |
| Blade Down Pressure – Maximum GVW | 29,125 lbs (13,211 kg) |
| Blade Pull – Base GVW | 20,350 lbs (9,231 kg) |
| Blade Pull – Maximum GVW | 24,218 lbs (10,985 kg) |
| Blade Pull at Max Weight | 40,221 lbs (18,244 kg) |
| Blade Width | 12 ft (4 m) |
| Cutting Edge Thickness | 1 in (2 cm) |
| Cutting Edge Width | 6 in (15 cm) |
| End Bit – Thickness | 1 in (2 cm) |
| End Bit – Width | 6 in (15 cm) |
| Max Depth of Cut | 28 in (72 cm) |
| Moldboard – Height | 24 in (61 cm) |
| Moldboard – Thickness | 1 in (2 cm) |
| Moldboard – Width | 12 ft (4 m) |
| Moldboard Height | 24 in (61 cm) |
| Moldboard Length | 12 ft (4 m) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 20 in (51 cm) |
| Side Shift Right | 26 in (66 cm) |
| Throat Clearance | 5 in (13 cm) |
Operating Specifications
| Articulation Angle – Left/Right | 20 degrees |
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 10 gal (39 l) |
| Forward – 1st | 2 mph (4 kph) |
| Forward – 2nd | 3 mph (5 kph) |
| Forward – 3rd | 5 mph (8 kph) |
| Forward – 4th | 7 mph (10 kph) |
| Forward – 5th | 10 mph (16 kph) |
| Forward – 6th | 14 mph (22 kph) |
| Forward – 7th | 19 mph (31 kph) |
| Forward – 8th | 28 mph (45 kph) |
| Fuel Capacity | 90 gal (341 l) |
| Hydraulic System Fluid Capacity | 16 gal (60 l) |
| Max Operation Weight – Front Axle | 16,312 lbs (7,399 kg) |
| Max Operation Weight – Rear Axle | 28,378 lbs (12,872 kg) |
| Max Operation Weight – Total | 44,690 lbs (20,271 kg) |
| Operating Weight | 31,069 lbs (14,093 kg) |
| Rear Diff/Final Drive Fluid Capacity | 13 gal (50 l) |
| Reverse – 1st | 2 |
| Reverse – 2nd | 4 mph (6 kph) |
| Reverse – 3rd | 6 mph (9 kph) |
| Reverse – 4th | 9 mph (14 kph) |
| Reverse – 5th | 16 mph (26 kph) |
| Reverse – 6th | 24 mph (38 kph) |
| Std Operation Weight – Front Axle | 8,233 lbs (3,734 kg) |
| Std Operation Weight – Rear Axle | 22,836 lbs (10,358 kg) |
| Std Operation Weight – Total | 31,069 lbs (14,093 kg) |
| Steering Range – Left/Right | 47.5 degrees |
| Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
| Top Speed – Forward | 28 mph (45 kph) |
| Top Speed – Reverse | 24 mph (38 kph) |
| Turning Radius – Outside Front Tires | 25 ft (7 m) |
Power Train
| Brakes – Parking | Multiple oil disc |
| Brakes – Secondary | Dual circuit control system |
| Brakes – Service | Multiple oil-disc |
| Brakes – Service – Surface Area | 3,565 cu in (58,420 cu cm) |
| Forward/Reverse Gears | 8 Fwd / 6 Rev |
| Transmission | Direct drive, power shift, countershaft |
Ripper
| Machine Length Increase, Beam Raised | 39 in (100 cm) |
| Penetration Force | 17,705 lbs (8,031 kg) |
| Pry-Out Force | 26,303 lbs (11,931 kg) |
| Ripper Shank Holder Spacing | 21 in (53 cm) |
| Ripper Shank Holders | 5 |
| Ripping Depth – Maximum | 17 in (43 cm) |
Scarifier
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing | 5 in (12 cm) |
| Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum | 18 in (47 cm) |
| Front, V-Type, 5 or 11 Tooth – Working Width | 47 in (120 cm) |
| Mid, Straight – Scarifier Shank Holder Spacing | 4 in (11 cm) |
| Mid, Straight – Scarifier Shank Holders | 17 |
| Mid, Straight – Scarifying Depth, Maximum | 13 in (32 cm) |
| Mid, Straight – Working Width | 71 in (180 cm) |
| Mid, V-Type – Scarifier Shank Holder Spacing | 5 in (12 cm) |
| Mid, V-Type – Scarifier Shank Holders | 11 |
| Mid, V-Type – Scarifying Depth, Maximum | 12 in (29 cm) |
| Mid, V-Type – Working Width | 47 in (118 cm) |
| Rear – Scarifier Shank Holder Spacing | 11 in (27 cm) |
| Rear – Scarifier Shank Holders | 9 |
| Rear – Scarifying Depth, Maximum | 11 in (27 cm) |
| Rear – Working Width | 91 in (231 cm) |
Service Refill
| Circle Drive Housing | 2 gal (7 l) |
| Cooling System | 9 gal (33 l) |
| Engine Oil | 4 gal (14 l) |
| Front Wheel Spindle Bearing Housing | 0 gal (0 l) |
| Fuel Capacity | 90 gal (341 l) |
| Hydraulic System – Tank | 17 gal (64 l) |
| Tandem Housing – Each | 16 gal (59 l) |
| Transmission – Differential – Final Drives | 17 gal (62 l) |
Standards
| Brakes | ISO 3450:1996 |
| ROPS/FOPS | ISO 3471:1992 / ISO 3449:1992 |
| Sound | ISO 6394:1998 / ISO 6395:1988 |
| Steering | ISO 5010:1992 |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 25 ft (7 m) |
Tandems
| Drive Chain Pitch | 2 in (5 cm) |
| Height | 20 in (50 cm) |
| Sidewall Thickness – Inner | 1 in (1 cm) |
| Sidewall Thickness – Outer | 1 in (2 cm) |
| Tandem Oscillation – Front Down | 25 degrees |
| Tandem Oscillation – Front Up | 15 degrees |
| Wheel Axle Spacing | 60 in (151 cm) |
| Width | 7 in (17 cm) |
Transmission
| Max Speed – Forward | 28 mph (45 kph) |
| Max Speed – Reverse | 24 mph (38 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | direct drive, power shift, countershaft |
Weights
| Gross Vehicle Weight – Base – Front Axle | 9,303 lbs (4,220 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 26,479 lbs (12,011 kg) |
| Gross Vehicle Weight – Base – Total | 35,783 lbs (16,231 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 15,077 lbs (6,839 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 33,523 lbs (15,206 kg) |
| Gross Vehicle Weight – Maximum – Total | 48,601 lbs (22,045 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 11,221 lbs (5,090 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 40,565 lbs (18,400 kg) |
| Operating Weight – Typically Equipped | 40,565 lbs (18,400 kg) |
