Contents
Blades
| Blade Tip Range – Backward | 5 degrees |
| Blade Tip Range – Forward | 40 degrees |
| Circle Centershift – Left | 27 in (70 cm) |
| Circle Centershift – Right | 29 in (73 cm) |
| Maximum Blade Position Angle | 90 degrees |
| Maximum Depth of Cut | 28 in (71 cm) |
| Maximum Lift Above Ground | 19 in (48 cm) |
| Maximum Shoulder Reach Outside of Tires – Left | 71 in (179 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 78 in (198 cm) |
| Moldboard Sideshift – Left | 20 in (51 cm) |
| Moldboard Sideshift – Right | 26 in (66 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 60 in (153 cm) |
| Max Reach Outside Tires – Left | 71 in (179 cm) |
| Max Reach Outside Tires – Right | 78 in (198 cm) |
| Shift Left | 27 in (70 cm) |
| Shift Right | 29 in (73 cm) |
Dimensions
| Blade Base | 8 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Ground Clearance – Rear Axle | 13 in (34 cm) |
| Height – Exhaust Stack | 121 in (307 cm) |
| Height – Front Axle Center | 24 in (60 cm) |
| Height – Top of Cab | 130 ft (40 m) |
| Height – Top of Cylinders | 119 in (302 cm) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Length – Between Tandem Axles | 60 in (152 cm) |
| Length – Front Axle to Mid Tandem | 241 in (612 cm) |
| Length – Front Axle to Moldboard | 100 in (254 cm) |
| Length – Front Tire to Rear of Machine | 344 in (874 cm) |
| Overall Length | 29 ft (9 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 20 ft (6 m) |
| Width – Outside Front Tires | 98 in (249 cm) |
| Width – Outside Rear Tires | 98 in (249 cm) |
| Width – Tire Center Lines | 84 in (213 cm) |
| Width Over Tires | 8 ft (2 m) |
Engine
| Base Power (1st Gear) – Net | 183 hp (136 kw) |
| Base Power (1st Gear) – Net – Metric | 186 hp (139 kw) |
| Bore | 4 in (11 cm) |
| Derating Altitude | 10,000 ft (3,048 m) |
| Displacement | 439 cu in (7,194 cu cm) |
| Emissions | Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
| Engine Model | Cat C7 ACERT |
| High – Ambient Capability | 122 degrees |
| High Ambient – Fan Speed – Maximum | 1,650 rpm |
| High Ambient – Fan Speed – Minimum | 600 rpm |
| Max Power | 183 hp (136 kw) |
| Net Power Gears 7-8 | 183 hp (136 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Speed at Rated Power | 2,000 rpm |
| Standard – Ambient Capability | 109 degrees |
| Standard – Fan Speed – Maximum | 1,450 rpm |
| Standard – Fan Speed – Minimum | 600 rpm |
| Stroke | 5 in (13 cm) |
| Torque Rise – VHP Plus | 39% |
| VHP Plus Range – Net | 136-174 kW (183-233) |
| VHP Plus Range – Net – Metric | 136-174 kW (186-237) |
Frame
| Circle – Blade Beam Thickness | 2 in (4 cm) |
| Circle – Diameter | 60 in (153 cm) |
| Drawbar – Height | 6 in (15 cm) |
| Drawbar – Width | 3 in (8 cm) |
| Front Axle – Height to Center | 23 in (58 cm) |
| Front Axle – Total Oscillation per Side | 32 degrees |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
| Front Frame Structure – Height | 12 ft (4 m) |
| Front Frame Structure – Width | 12 ft (4 m) |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum System Pressure | 3500 psi |
| Pump Flow | 56 gpm (211 lpm) |
| Pump Output | 56 gpm (211 lpm) |
| Pump Type | Variable piston |
| Relief Valve Pressure | 3500 psi |
| Standby Pressure | 450 psi |
Moldboard
| Arc Radius | 16 in (41 cm) |
| Blade Pull – Base GVW | 24,294 lbs (11,020 kg) |
| Blade Pull – Maximum GVW | 31,758 lbs (14,405 kg) |
| Blade Pull at Max Weight | 45,788 lbs (20,769 kg) |
| Blade Width | 12 ft (4 m) |
| Cutting Edge Thickness | 1 in (2 cm) |
| Cutting Edge Width | 6 in (15 cm) |
| End Bit – Thickness | 1 in (2 cm) |
| End Bit – Width | 6 in (15 cm) |
| Max Depth of Cut | 28 in (71 cm) |
| Moldboard – Height | 24 in (61 cm) |
| Moldboard – Thickness | 1 in (2 cm) |
| Moldboard – Width | 12 ft (4 m) |
| Moldboard Height | 24 in (61 cm) |
| Moldboard Length | 12 ft (4 m) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 20 in (51 cm) |
| Side Shift Right | 26 in (66 cm) |
| Throat Clearance | 7 in (17 cm) |
Operating Specifications
| Articulation Angle – Left/Right | 20 degrees |
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 12 gal (47 l) |
| Forward – 1st | 3 mph (4 kph) |
| Forward – 2nd | 3 mph (5 kph) |
| Forward – 3rd | 5 mph (8 kph) |
| Forward – 4th | 7 mph (11 kph) |
| Forward – 5th | 11 mph (17 kph) |
| Forward – 6th | 15 mph (23 kph) |
| Forward – 7th | 20 mph (32 kph) |
| Forward – 8th | 29 mph (47 kph) |
| Fuel Capacity | 110 gal (416 l) |
| Hydraulic System Fluid Capacity | 16 gal (60 l) |
| Max Operation Weight – Front Axle | 17,908 lbs (8,123 kg) |
| Max Operation Weight – Rear Axle | 32,967 lbs (14,954 kg) |
| Max Operation Weight – Total | 50,875 lbs (23,077 kg) |
| Operating Weight | 33,356 lbs (15,130 kg) |
| Rear Diff/Final Drive Fluid Capacity | 17 gal (65 l) |
| Reverse – 1st | 2 |
| Reverse – 2nd | 4 mph (6 kph) |
| Reverse – 3rd | 5 mph (9 kph) |
| Reverse – 4th | 8 mph (14 kph) |
| Reverse – 5th | 16 mph (25 kph) |
| Reverse – 6th | 23 mph (37 kph) |
| Std Operation Weight – Front Axle | 9,173 lbs (4,161 kg) |
| Std Operation Weight – Rear Axle | 24,183 lbs (10,969 kg) |
| Std Operation Weight – Total | 33,356 lbs (15,130 kg) |
| Steering Range – Left/Right | 47.5 degrees |
| Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
| Top Speed – Forward | 29 mph (47 kph) |
| Top Speed – Reverse | 23 mph (37 kph) |
| Turning Radius – Outside Front Tires | 25 ft (8 m) |
Power Train
| Brakes – Parking | Multiple oil disc |
| Brakes – Secondary | Dual circuit control system |
| Brakes – Service | Multiple oil disc |
| Brakes – Service – Surface Area | 3,565 cu in (58,420 cu cm) |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Transmission | Direct drive, power shift, countershaft |
Ripper
| Machine Length Increase, Beam Raised | 36 in (92 cm) |
| Penetration Force | 20,540 lbs (9,317 kg) |
| Pry-Out Force | 26,259 lbs (11,911 kg) |
| Ripper Shank Holder Spacing | 21 in (53 cm) |
| Ripper Shank Holders | 5 |
| Ripping Depth – Maximum | 17 in (43 cm) |
Scarifier
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing | 5 in (12 cm) |
| Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum | 18 in (47 cm) |
| Front, V-Type, 5 or 11 Tooth – Working Width | 47 in (120 cm) |
| Mid, V-Type – Scarifier Shank Holder Spacing | 5 in (12 cm) |
| Mid, V-Type – Scarifier Shank Holders | 11 |
| Mid, V-Type – Scarifying Depth, Maximum | 12 in (29 cm) |
| Mid, V-Type – Working Width | 47 in (118 cm) |
| Rear – Scarifier Shank Holder Spacing | 11 in (27 cm) |
| Rear – Scarifier Shank Holders | 9 |
| Rear – Scarifying Depth, Maximum | 11 in (27 cm) |
| Rear – Working Width | 91 in (231 cm) |
Service Refill
| Circle Drive Housing | 2 gal (7 l) |
| Cooling System | 11 gal (40 l) |
| Engine Oil | 7 gal (25 l) |
| Front Wheel Spindle Bearing Housing | 0 gal (1 l) |
| Fuel Capacity | 110 gal (416 l) |
| Hydraulic System – Tank | 17 gal (64 l) |
| Tandem Housing – Each | 17 gal (64 l) |
| Transmission – Differential – Final Drives | 17 gal (64 l) |
Standards
| Brakes | ISO 3450:1996 |
| ROPS/FOPS | ISO 3471:2008, ISO 3449:2005 Level II |
| Sound | ISO 6394:2008, ISO 6395:2008 |
| Steering | ISO 5010:2007 |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 26 ft (8 m) |
Tandems
| Drive Chain Pitch | 2 in (5 cm) |
| Height | 20 in (51 cm) |
| Sidewall Thickness – Inner | 1 in (2 cm) |
| Sidewall Thickness – Outer | 1 in (2 cm) |
| Tandem Oscillation – Front Down | 25 degrees |
| Tandem Oscillation – Front Up | 15 degrees |
| Wheel Axle Spacing | 60 in (152 cm) |
| Width | 8 in (20 cm) |
Transmission
| Max Speed – Forward | 29 mph (47 kph) |
| Max Speed – Reverse | 23 mph (37 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | direct drive, power shift, countershaft |
Weights
| Gross Vehicle Weight – Base – Front Axle | 9,561 lbs (4,337 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 26,993 lbs (12,244 kg) |
| Gross Vehicle Weight – Base – Total | 36,554 lbs (16,581 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 16,606 lbs (7,532 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 35,287 lbs (16,006 kg) |
| Gross Vehicle Weight – Maximum – Total | 51,893 lbs (23,538 kg) |
| Gross Vehicle Weight – Typically Equipped | 41,868 lbs (18,991 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 11,716 lbs (5,314 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 41,868 lbs (18,991 kg) |
| Operating Weight – Typically Equipped | 41,868 lbs (18,991 kg) |
