Contents
Blades
| Blade Tip Range – Backward | 5 degrees |
| Blade Tip Range – Forward | 40 degrees |
| Circle Centershift – Left | 27 in (70 cm) |
| Circle Centershift – Right | 29 in (73 cm) |
| Maximum Blade Position Angle | 90 degrees |
| Maximum Depth of Cut | 28 in (71 cm) |
| Maximum Lift Above Ground | 19 in (48 cm) |
| Maximum Shoulder Reach Outside of Tires – Left | 71 in (179 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 78 in (198 cm) |
| Moldboard Sideshift – Left | 20 in (51 cm) |
| Moldboard Sideshift – Right | 26 in (66 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 60 in (153 cm) |
| Max Lift Above Ground | 19 in (48 cm) |
| Max Reach Outside Tires – Left | 71 in (179 cm) |
| Max Reach Outside Tires – Right | 78 in (198 cm) |
| Rotation | 360 degrees |
| Shift Left | 27 in (70 cm) |
| Shift Right | 29 in (73 cm) |
Dimensions
| Blade Base | 8 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Overall Length | 29 ft (9 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 20 ft (6 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Base Power (1st Gear) – Net | 193 hp (144 kw) |
| Base Power (1st Gear) – Net – Metric | 196 hp (146 kw) |
| Bore | 5 in (11 cm) |
| Derating Altitude | 10,000 ft (3,048 m) |
| Displacement | 568 cu in (9,300 cu cm) |
| Emissions | U.S. Tier 4 Interim/EU Stage IIIB |
| High – Ambient Capability | 122 degrees |
| High Ambient – Fan Speed – Maximum | 1,550 rpm |
| High Ambient – Fan Speed – Minimum | 500 rpm |
| High Ambient – Fan Speed – Standard | 1,400 rpm |
| Maximum Torque | 920 lbs ft (1,247 nm) |
| Net Torque Gears 7-8 | 920 lbs ft (1,247 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Speed at Rated Power | 2,100 rpm |
| Standard Capability | 109 degrees |
| Stroke | 6 in (15 cm) |
| Torque Measured @ | 2100 rpm |
| VHP Plus – Gear 1F, Net | 193 hp (144 kw) |
| VHP Plus – Gear 2F, Net | 202 hp (151 kw) |
| VHP Plus – Gear 3F, Net | 213 hp (159 kw) |
| VHP Plus – Gear 4F, Net | 223 hp (166 kw) |
| VHP Plus – Gear 5F, Net | 228 hp (170 kw) |
| VHP Plus – Gear 6F, Net | 233 hp (174 kw) |
| VHP Plus – Gear 7F, Net | 238 hp (177 kw) |
| VHP Plus – Gear 8F, Net | 243 hp (181 kw) |
| VHP Plus Range – Net | 144-181 kW (193-243) |
| VHP Plus Range – Net – Metric | 144-181 kW (196-246) |
Frame
| Circle – Blade Beam Thickness | 2 in (4 cm) |
| Circle – Diameter | 60 in (153 cm) |
| Drawbar – Height | 6 in (15 cm) |
| Drawbar – Thickness | 1 in (1 cm) |
| Drawbar – Width | 3 in (8 cm) |
| Front Axle – Height to Center | 24 in (60 cm) |
| Front Axle – Total Oscillation per Side | 32 degrees |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
| Front Frame Structure – Height | 1 ft (0 m) |
| Front Frame Structure – Width | 1 ft (0 m) |
| Front-Top/Bottom Plate – Thickness | 1 in (2 cm) |
| Front-Top/Bottom Plate – Width | 12 in (30 cm) |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Circuit Type | Parallel |
| Maximum System Pressure | 3500 psi |
| Pump Flow | 56 gpm (211 lpm) |
| Pump Output | 56 gpm (211 lpm) |
| Pump Type | Variable Piston |
| Relief Valve Pressure | 3500 psi |
| Reservoir Tank Capacity | 16 gal (60 l) |
| Standby Pressure | 609 psi |
Moldboard
| Arc Radius | 16 in (41 cm) |
| Blade Down Pressure | 22,884 lbs (10,380 kg) |
| Blade Down Pressure – Base GVW | 16,365 lbs (7,423 kg) |
| Blade Down Pressure – Maximum GVW | 29,196 lbs (13,243 kg) |
| Blade Pull – Base GVW | 25,765 lbs (11,687 kg) |
| Blade Pull – Maximum GVW | 34,072 lbs (15,455 kg) |
| Blade Pull at Max Weight | 20,044 lbs (9,092 kg) |
| Blade Width | 12 ft (4 m) |
| Cutting Edge Thickness | 1 in (2 cm) |
| Cutting Edge Width | 6 in (15 cm) |
| End Bit – Thickness | 1 in (2 cm) |
| End Bit – Width | 6 in (15 cm) |
| Max Depth of Cut | 28 in (72 cm) |
| Moldboard – Height | 24 in (61 cm) |
| Moldboard – Thickness | 1 in (2 cm) |
| Moldboard Height | 24 in (61 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 20 in (51 cm) |
| Side Shift Right | 26 in (66 cm) |
| Throat Clearance | 7 in (17 cm) |
Operating Specifications
| Articulation Angle – Left/Right | 20 degrees |
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 15 gal (56 l) |
| Forward – 1st | 3 mph (4 kph) |
| Forward – 2nd | 3 mph (5 kph) |
| Forward – 3rd | 5 mph (8 kph) |
| Forward – 4th | 7 mph (11 kph) |
| Forward – 5th | 11 mph (17 kph) |
| Forward – 6th | 15 mph (23 kph) |
| Forward – 7th | 20 mph (32 kph) |
| Forward – 8th | 29 mph (47 kph) |
| Fuel Capacity | 110 gal (416 l) |
| Hydraulic System Fluid Capacity | 27 gal (100 l) |
| Max Operation Weight – Front Axle | 13,343 lbs (6,052 kg) |
| Max Operation Weight – Rear Axle | 36,444 lbs (16,531 kg) |
| Max Operation Weight – Total | 49,787 lbs (22,583 kg) |
| Oil System Fluid Capacity | 8 gal (30 l) |
| Reverse – 1st | 2 |
| Reverse – 2nd | 4 mph (6 kph) |
| Reverse – 3rd | 5 mph (9 kph) |
| Reverse – 4th | 8 mph (14 kph) |
| Reverse – 5th | 16 mph (25 kph) |
| Reverse – 6th | 23 mph (37 kph) |
| Steering Range – Left/Right | 47.5 degrees |
| Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
| Top Speed – Forward | 29 mph (47 kph) |
| Top Speed – Reverse | 23 mph (37 kph) |
| Transmission Fluid Capacity | 17 gal (65 l) |
| Turning Radius – Outside Front Tires | 25 ft (8 m) |
Power Train
| Brakes – Parking | Multiple Oil Disc |
| Brakes – Secondary | Dual Circuit |
| Brakes – Service | Multiple Oil Disc |
| Brakes – Service – Surface Area | 3,565 cu in (58,420 cu cm) |
| Forward/Reverse Gears | 8 Fwd/6 Rev |
| Transmission | Direct Drive, Powershift |
Ripper
| Machine Length Increase, Beam Raised | 41 in (103 cm) |
| Penetration Force | 20,693 lbs (9,386 kg) |
| Pry-Out Force | 27,655 lbs (12,544 kg) |
| Ripper Shank Holder Spacing | 21 in (53 cm) |
| Ripper Shank Holders | 5 |
| Ripping Depth – Maximum | 17 in (43 cm) |
Scarifier
| Front, V-Type – Scarifier Shank Holder Spacing | 18 in (47 cm) |
| Front, V-Type – Scarifying Depth, Maximum | 41 in (103 cm) |
| Front, V-Type – Working Width | 47 in (120 cm) |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing | 5 in (12 cm) |
| Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum | 18 in (47 cm) |
| Front, V-Type, 5 or 11 Tooth – Working Width | 41 in (103 cm) |
| Mid, V-Type – Scarifier Shank Holder Spacing | 5 in (12 cm) |
| Mid, V-Type – Scarifier Shank Holders | 11 |
| Mid, V-Type – Scarifying Depth, Maximum | 12 in (29 cm) |
| Mid, V-Type – Working Width | 47 in (118 cm) |
| Rear – Scarifier Shank Holder Spacing | 11 in (27 cm) |
| Rear – Scarifier Shank Holders | 9 |
| Rear – Scarifying Depth, Maximum | 17 in (43 cm) |
| Rear – Working Width | 84 in (213 cm) |
Service Refill
| Circle Drive Housing | 2 gal (7 l) |
| Cooling System | 15 gal (56 l) |
| Engine Oil | 8 gal (30 l) |
| Front Wheel Spindle Bearing Housing | 0 gal (1 l) |
| Fuel Capacity | 110 gal (416 l) |
| Hydraulic System – Tank | 17 gal (64 l) |
| Hydraulic System – Total | 26 gal (100 l) |
| Tandem Housing – Each | 17 gal (64 l) |
| Transmission – Differential – Final Drives | 17 gal (65 l) |
Standards
| Brakes | ISO 3450, ISO 10265 |
| ROPS/FOPS | ISO 3471/ISO 3499 |
| Sound | ISO 6394, ISO 6395 |
| Steering | ISO 5010 |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 26 ft (8 m) |
Tandems
| Drive Chain Pitch | 2 in (5 cm) |
| Height | 20 in (51 cm) |
| Sidewall Thickness – Inner | 1 in (2 cm) |
| Sidewall Thickness – Outer | 1 in (2 cm) |
| Tandem Oscillation – Front Down | 25 degrees |
| Tandem Oscillation – Front Up | 15 degrees |
| Wheel Axle Spacing | 60 in (152 cm) |
| Width | 8 in (21 cm) |
Transmission
| Max Speed – Forward | 29 mph (47 kph) |
| Max Speed – Reverse | 23 mph (37 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | Direct Drive, Powershift |
Weights
| Gross Vehicle Weight – Base – Front Axle | 9,534 lbs (4,325 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 28,381 lbs (12,873 kg) |
| Gross Vehicle Weight – Base – Total | 37,916 lbs (17,198 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 17,009 lbs (7,715 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 37,860 lbs (17,173 kg) |
| Gross Vehicle Weight – Maximum – Total | 54,869 lbs (24,888 kg) |
| Operating Weight – Typically Equipped | 43,686 lbs (19,816 kg) |
| Operating Weight – Typically Equipped – Front Axle | 12,483 lbs (5,662 kg) |
| Operating Weight – Typically Equipped – Rear Axle | 31,203 lbs (14,153 kg) |
| Operating Weight – Typically Equipped – Total | 43,686 lbs (19,816 kg) |
