Caterpillar 14H Motor Grader

Circle

Blade Tip Angle – Front 40 degrees
Blade Tip Angle – Rear 5 degrees
Diameter 72 in (182 cm)
Max Lift Above Ground 17 in (42 cm)
Max Reach Outside Tires – Left 81 in (206 cm)
Max Reach Outside Tires – Right 82 in (208 cm)
Shift Left 26 in (65 cm)
Shift Right 21 in (52 cm)

Dimensions

Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 11 ft (3 m)
Rear Ground Clearance 1 ft (0 m)
Tandem Axle Wheelbase 6 ft (2 m)
Wheelbase 21 ft (6 m)
Width Over Tires 9 ft (3 m)

Engine

Net Power Gear 1-2 220 hp (164 kw)
Net Power Gear 4-6 240 hp (179 kw)
Net Power Gear 5-6 240 hp (179 kw)
Number of Cylinders 6
Power Measured @ 2000 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 32 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Type axial piston
Relief Valve Pressure 3500 psi

Moldboard

Blade Down Pressure 34,518 lbs (15,657 kg)
Blade Pull at Max Weight 52,660 lbs (23,886 kg)
Max Depth of Cut 17 in (44 cm)
Moldboard Height 27 in (69 cm)
Moldboard Thickness 1 in (3 cm)
Side Shift Left 26 in (65 cm)
Side Shift Right 31 in (79 cm)

Operating Specifications

Alternator Supplied Amperage 50 amps
Circle Gearbox Fluid Capacity 2 gal (6 l)
Cooling System Fluid Capacity 13 gal (48 l)
Max Operation Weight – Front Axle 19,425 lbs (8,811 kg)
Max Operation Weight – Rear Axle 39,084 lbs (17,728 kg)
Max Operation Weight – Total 58,509 lbs (26,539 kg)
Operating Voltage 24 volts
Std Operation Weight – Front Axle 11,695 lbs (5,305 kg)
Std Operation Weight – Rear Axle 29,770 lbs (13,503 kg)
Tandem Case Fluid Capacity (each) 26 gal (97 l)
Tire Size 16-24 12PR (G-2)
Transmission Fluid Capacity 22 gal (82 l)

Steering System

Articulation Angle 20 degrees

Transmission

Max Speed – Forward 27 mph (43 kph)
Max Speed – Reverse 29 mph (47 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 8
Transmission Type direct drive, power shift, planetary
Ask A Question