Contents
Blades
| Maximum Shoulder Reach Outside of Tires – Left | 82 in (208 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 90 in (229 cm) |
| Moldboard Sideshift – Left | 32 in (81 cm) |
| Moldboard Sideshift – Right | 37 in (94 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 61 in (155 cm) |
| Max Lift Above Ground | 18 in (45 cm) |
| Max Reach Outside Tires – Left | 82 in (209 cm) |
| Max Reach Outside Tires – Right | 90 in (228 cm) |
| Shift Left | 27 in (70 cm) |
| Shift Right | 29 in (73 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Overall Length | 29 ft (9 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 20 ft (6 m) |
| Width Over Tires | 8 ft (2 m) |
Engine
| Base Power (1st Gear) – Net | 213 hp (159 kw) |
| Displacement | 537 cu in (8,800 cu cm) |
| Engine Model | C9 ACERT VHP |
| Max Power | 213 hp (159 kw) |
| Net Power Gears 7-8 | 213 hp (159 kw) |
| Net Torque Gears 7-8 | 912 lbs ft (1,237 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 2000 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 56 gpm (211 lpm) |
| Pump Type | variable piston |
| Relief Valve Pressure | 3500 psi |
Moldboard
| Blade Pull at Max Weight | 32,904 lbs (14,925 kg) |
| Max Depth of Cut | 30 in (75 cm) |
| Moldboard Height | 27 in (69 cm) |
| Moldboard Length | 14 ft (4 m) |
| Moldboard Thickness | 1 in (3 cm) |
| Moldboard Width | 14 ft (4 m) |
| Side Shift Left | 32 in (82 cm) |
| Side Shift Right | 37 in (95 cm) |
Operating Specifications
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 11 gal (40 l) |
| Fuel Capacity | 105 gal (397 l) |
| Hydraulic System Fluid Capacity | 17 gal (64 l) |
| Max Operation Weight – Front Axle | 18,478 lbs (8,381 kg) |
| Max Operation Weight – Rear Axle | 34,317 lbs (15,566 kg) |
| Max Operation Weight – Total | 52,795 lbs (23,947 kg) |
| Operating Weight | 35,060 lbs (15,903 kg) |
| Rear Diff/Final Drive Fluid Capacity | 17 gal (65 l) |
| Std Operation Weight – Front Axle | 9,677 lbs (4,389 kg) |
| Std Operation Weight – Rear Axle | 25,383 lbs (11,514 kg) |
| Std Operation Weight – Total | 35,060 lbs (15,903 kg) |
| Tandem Case Fluid Capacity (each) | 21 gal (80 l) |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 25 ft (8 m) |
Transmission
| Max Speed – Forward | 30 mph (47 kph) |
| Max Speed – Reverse | 23 mph (37 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | direct drive, power shift, countershaft |
