Caterpillar 16H Motor Grader

Circle

Blade Tip Angle – Front 40 degrees
Blade Tip Angle – Rear 5 degrees
Diameter 72 in (182 cm)
Max Lift Above Ground 17 in (42 cm)
Max Reach Outside Tires – Left 91 in (231 cm)
Max Reach Outside Tires – Right 91 in (231 cm)
Shift Left 27 in (69 cm)
Shift Right 22 in (56 cm)

Dimensions

Blade Base 10 ft (3 m)
Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 12 ft (4 m)
Overall Length 33 ft (10 m)
Rear Ground Clearance 1 ft (0 m)
Tandem Axle Wheelbase 6 ft (2 m)
Wheelbase 23 ft (7 m)

Engine

Net Power Gear 1-2 265 hp (198 kw)
Net Power Gear 4-6 285 hp (213 kw)
Net Power Gear 5-6 285 hp (213 kw)
Net Torque Gears 7-8 1,143 lbs ft (1,550 nm)
Number of Cylinders 6
Power Measured @ 2000 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 32 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Type axial piston
Relief Valve Pressure 3500 psi

Moldboard

Blade Down Pressure 34,901 lbs (15,831 kg)
Blade Pull at Max Weight 45,131 lbs (20,471 kg)
Max Depth of Cut 19 in (47 cm)
Moldboard Height 31 in (79 cm)
Moldboard Thickness 1 in (3 cm)
Side Shift Left 26 in (65 cm)
Side Shift Right 31 in (79 cm)

Operating Specifications

Circle Gearbox Fluid Capacity 2 gal (8 l)
Cooling System Fluid Capacity 12 gal (47 l)
Fuel Capacity 130 gal (492 l)
Max Operation Weight – Front Axle 19,502 lbs (8,846 kg)
Max Operation Weight – Rear Axle 50,146 lbs (22,746 kg)
Max Operation Weight – Total 69,648 lbs (31,592 kg)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 30 gal (114 l)
Std Operation Weight – Front Axle 15,397 lbs (6,984 kg)
Std Operation Weight – Rear Axle 39,153 lbs (17,760 kg)
Tandem Case Fluid Capacity (each) 32 gal (119 l)
Tire Size 15-25 12PR (E-2)

Steering System

Articulation Angle 20 degrees
Turning Radius 27 ft (8 m)

Transmission

Number of Gears – Forward 8
Number of Gears – Reverse 8
Transmission Type direct drive, power shift, planetary
Ask A Question