Contents
Blades
| Blade Tip Range – Backward | 0 degrees |
| Blade Tip Range – Forward | 40 degrees |
| Circle Centershift – Left | 210 in (533 cm) |
| Circle Centershift – Right | 210 in (534 cm) |
| Maximum Blade Position Angle | 35 degrees |
| Maximum Depth of Cut | 26 in (66 cm) |
| Maximum Lift Above Ground | 25 in (63 cm) |
| Maximum Shoulder Reach Outside of Tires – Left | 127 in (322 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 127 in (323 cm) |
| Moldboard Sideshift – Left | 178 in (453 cm) |
| Moldboard Sideshift – Right | 193 in (490 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Diameter | 104 in (263 cm) |
| Max Lift Above Ground | 25 in (63 cm) |
| Max Reach Outside Tires – Left | 127 in (322 cm) |
| Max Reach Outside Tires – Right | 128 in (324 cm) |
| Shift Left | 32 in (81 cm) |
| Shift Right | 17 in (44 cm) |
Dimensions
| Blade Base | 13 ft (4 m) |
| Front Ground Clearance | 3 ft (1 m) |
| Ground Clearance – Rear Axle | 24 in (61 cm) |
| Height – Exhaust Stack | 170 in (432 cm) |
| Height – Front Axle Center | 34 in (86 cm) |
| Height – Top of Cab | 15 ft (4 m) |
| Height – Top of Cylinders | 151 in (385 cm) |
| Height to Top of Isomount Cab | 14 ft (4 m) |
| Length – Between Tandem Axles | 90 in (229 cm) |
| Length – Counterweight to Ripper | 634 in (1,610 cm) |
| Length – Front Axle to Mid Tandem | 405 in (1,028 cm) |
| Length – Front Axle to Moldboard | 159 in (405 cm) |
| Length – Front Tire to Rear of Machine | 559 in (1,419 cm) |
| Overall Length | 47 ft (14 m) |
| Rear Ground Clearance | 2 ft (1 m) |
| Tandem Axle Wheelbase | 8 ft (2 m) |
| Wheelbase | 34 ft (10 m) |
| Width – Outside Front Tires | 169 in (428 cm) |
| Width – Outside Rear Tires | 166 in (422 cm) |
| Width – Tire Center Lines | 136 in (345 cm) |
| Width Over Tires | 14 ft (4 m) |
Engine
| Base Power (1st Gear) – Net | 533 hp (397 kw) |
| Base Power (All Gears) – Net | 533 hp (397 kw) |
| Bore | 6 in (14 cm) |
| Derating Altitude | 5,500 ft (1,676 m) |
| Displacement | 1,105 cu in (18,100 cu cm) |
| Engine Model | Cat C18 ACERT |
| Max Power | 533 hp (397 kw) |
| Maximum Torque | 1,762 lbs ft (2,389 nm) |
| Net Power Gear 1-2 | 533 hp (397 kw) |
| Net Power Gear 4-6 | 533 hp (397 kw) |
| Net Power Gear 5-6 | 533 hp (397 kw) |
| Net Power Gears 7-8 | 533 hp (397 kw) |
| Net Torque Gears 7-8 | 1,762 lbs ft (2,389 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Standard – Ambient Capability | 122 degrees |
| Stroke | 7 in (18 cm) |
Frame
| Circle – Blade Beam Thickness | 6 in (16 cm) |
| Circle – Diameter | 104 in (263 cm) |
| Drawbar – Height | 9 in (22 cm) |
| Drawbar – Thickness | 1 in (2 cm) |
| Drawbar – Width | 9 in (23 cm) |
| Front Axle – Height to Center | 32 in (82 cm) |
| Front Axle – Total Oscillation per Side | 32 degrees |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
| Front-Top/Bottom Plate – Thickness | 2 in (5 cm) |
| Front-Top/Bottom Plate – Width | 20 in (51 cm) |
Front Axle
| Ground Clearance | 3 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum System Pressure | 3500 psi |
| Pump Flow | 145 gpm (549 lpm) |
| Pump Output | 145 gpm (549 lpm) |
| Pump Type | Variable piston |
| Relief Valve Pressure | 3500 psi |
| Standby Pressure | 450 psi |
Moldboard
| Arc Radius | 22 in (55 cm) |
| Blade Width | 24 ft (7 m) |
| Cutting Edge Thickness | 1 in (3 cm) |
| Cutting Edge Width | 13 in (33 cm) |
| End Bit – Thickness | 1 in (3 cm) |
| End Bit – Width | 8 in (20 cm) |
| Max Depth of Cut | 26 in (66 cm) |
| Moldboard – Height | 42 in (107 cm) |
| Moldboard – Thickness | 2 in (5 cm) |
| Moldboard Height | 42 in (107 cm) |
| Moldboard Length | 24 ft (7 m) |
| Moldboard Thickness | 2 in (5 cm) |
| Moldboard Width | 24 ft (7 m) |
| Side Shift Left | 34 in (87 cm) |
| Side Shift Right | 49 in (124 cm) |
| Throat Clearance | 6 in (16 cm) |
Operating Specifications
| Articulation Angle – Left/Right | 25 degrees |
| Circle Gearbox Fluid Capacity | 2 gal (9 l) |
| Cooling System Fluid Capacity | 24 gal (91 l) |
| Forward – 1st | 2 mph (4 kph) |
| Forward – 2nd | 4 mph (6 kph) |
| Forward – 3rd | 6 mph (10 kph) |
| Forward – 4th | 9 mph (15 kph) |
| Forward – 5th | 17 mph (28 kph) |
| Forward – 6th | 27 mph (43 kph) |
| Fuel Capacity | 350 gal (1,325 l) |
| Hydraulic System Fluid Capacity | 70 gal (265 l) |
| Max Operation Weight – Front Axle | 43,931 lbs (19,927 kg) |
| Max Operation Weight – Rear Axle | 101,877 lbs (46,211 kg) |
| Max Operation Weight – Total | 145,808 lbs (66,137 kg) |
| Operating Weight | 137,694 lbs (62,457 kg) |
| Rear Diff/Final Drive Fluid Capacity | 49 gal (185 l) |
| Reverse – 1st | 3.4 |
| Reverse – 2nd | 9 mph (14 kph) |
| Reverse – 3rd | 26 mph (41 kph) |
| Std Operation Weight – Front Axle | 41,360 lbs (18,761 kg) |
| Std Operation Weight – Rear Axle | 96,332 lbs (43,696 kg) |
| Std Operation Weight – Total | 137,692 lbs (62,456 kg) |
| Steering Range – Left/Right | 47.5 degrees |
| Tandem Case Fluid Capacity (each) | 85 gal (322 l) |
| Tire Size | 29.5-29 28PR |
| Top Speed – Forward | 27 mph (43 kph) |
| Top Speed – Reverse | 26 mph (42 kph) |
| Turning Radius – Outside Front Tires | 41 ft (12 m) |
Power Train
| Brakes – Parking | Spring applied, hydraulically released |
| Brakes – Secondary | Oil-actuated, oil-disc |
| Brakes – Service | Oil-actuated, oil-disc |
| Brakes – Service – Surface Area | 15,733 cu in (257,818 cu cm) |
| Forward/Reverse Gears | 6 Forward/3 Reverse |
| Transmission | Automatic, electronic power shift |
Ripper
| Penetration Force | 29,985 lbs (13,601 kg) |
| Pry-Out Force | 41,052 lbs (18,621 kg) |
| Ripper Shank Holders | 7 |
| Ripping Depth – Maximum | 18 in (45 cm) |
| Shank Holder Spacing – Maximum | 24 in (60 cm) |
| Shank Holder Spacing – Minimum | 23 in (59 cm) |
Service Refill
| Circle Drive Housing | 2 gal (8 l) |
| Cooling System | 24 gal (91 l) |
| Engine Oil | 16 gal (61 l) |
| Front Wheel Spindle Bearing Housing | 1 gal (4 l) |
| Fuel Capacity | 350 gal (1,325 l) |
| Hydraulic System – Tank | 36 gal (136 l) |
| Hydraulic System – Total | 70 gal (265 l) |
| Tandem Housing – Each | 85 gal (322 l) |
| Transmission – Differential – Final Drives | 49 gal (185 l) |
Standards
| Brakes | ISO 3450 |
| ROPS/FOPS | ISO 3471/ISO 3449 |
| Sound | ISO 6394/ISO 6395 |
| Steering | ISO 5010 |
Steering System
| Articulation Angle | 25 degrees |
| Turning Radius | 41 ft (12 m) |
Tandems
| Drive Chain Pitch | 3 in (8 cm) |
| Height | 41 in (104 cm) |
| Sidewall Thickness – Inner | 1 in (3 cm) |
| Sidewall Thickness – Outer | 1 in (3 cm) |
| Tandem Oscillation – Front Down | 20 degrees |
| Tandem Oscillation – Front Up | 20 degrees |
| Wheel Axle Spacing | 90 in (229 cm) |
| Width | 14 in (35 cm) |
Transmission
| Max Speed – Forward | 27 mph (43 kph) |
| Max Speed – Reverse | 26 mph (41 kph) |
| Number of Gears – Forward | 6 |
| Number of Gears – Reverse | 3 |
| Transmission Type | automatic, electronic power shift |
Weights
| Gross Vehicle Weight – Base – Front Axle | 42,177 lbs (19,131 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 96,110 lbs (43,595 kg) |
| Gross Vehicle Weight – Base – Total | 138,287 lbs (62,726 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 45,856 lbs (20,800 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 107,001 lbs (48,535 kg) |
| Gross Vehicle Weight – Maximum – Total | 152,857 lbs (69,335 kg) |
| Gross Vehicle Weight – Typically Equipped | 145,151 lbs (65,839 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 43,100 lbs (19,550 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 145,151 lbs (65,839 kg) |
| Operating Weight – Typically Equipped | 145,151 lbs (65,839 kg) |
