Champion 720A Motor Grader

Circle

Blade cutting depth 3 ft (1 m)
Blade ground clearance 2 ft (0 m)
Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 6.5 degrees
Diameter 66 in (168 cm)
Rotation 360 degrees
Shift Left 26 in (66 cm)
Shift Right 24 in (61 cm)

Dimensions

Blade Base 9 ft (3 m)
Overall Height with cab 11 ft (3 m)
Overall Length 28 ft (9 m)
Overall width 8 ft (3 m)
Tread width 82 in (209 cm)
Wheelbase 20 ft (6 m)

Engine

Aspiration Turbocharged
Bore 5 in (11 cm)
Displacement 505 cu in (8,271 cu cm)
Engine Model 6CT8.3
Net Power Gear 1-2 155 hp (116 kw)
Number of Cylinders 6
Power Measured @ 2300 rpm
Stroke 5 in (14 cm)
Torque 540 lbs ft (732 nm)
Torque Measured @ 1500 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 53 gpm (200 lpm)
Relief Valve Pressure 2500 psi

Moldboard

Max Reach outside – left 10 ft (3 m)
Max Reach outside – right 10 ft (3 m)
Moldboard Height 25 in (63 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Cooling System Fluid Capacity 11 gal (43 l)
Fuel Capacity 100 gal (379 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Oil System Fluid Capacity 10 gal (38 l)
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 9,560 lbs (4,336 kg)
Std Operation Weight – Rear Axle 22,720 lbs (10,306 kg)
Std Operation Weight – Total 32,280 lbs (14,642 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Tire Size 14.00 * 24, G-2
Transmission Fluid Capacity 10 gal (39 l)

Steering System

Articulation Angle 22 degrees
Turning Radius 26 ft (8 m)

Transmission

Max Speed – Forward 29 mph (47 kph)
Max Speed – Reverse 21 mph (33 kph)
Transmission Type Powershift
Ask A Question