Champion 740 Motor Grader

Circle

Blade cutting depth 3 ft (1 m)
Blade ground clearance 2 ft (0 m)
Blade Tip Angle – Front 48 degrees
Blade Tip Angle – Rear 2.5 degrees
Diameter 66 in (168 cm)
Max Lift Above Ground 20 in (51 cm)
Rotation 360 degrees
Shift Left 26 in (66 cm)
Shift Right 24 in (61 cm)

Dimensions

Blade Base 9 ft (3 m)
Overall Height with cab 11 ft (3 m)
Overall Length 28 ft (9 m)
Overall width 8 ft (3 m)
Tread width 84 in (214 cm)
Wheelbase 21 ft (6 m)

Engine

Aspiration Turbocharged
Displacement 659 cu in (10,801 cu cm)
Engine Model M11
Gross horsepower 225 hp (168 kw)
Net Power 210 hp (157 kw)
Number of Cylinders 6
Power Measured @ 2100 rpm
Torque Measured @ 1300 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 48 gpm (183 lpm)
Relief Valve Pressure 2500 psi

Moldboard

Max Reach outside – left 10 ft (3 m)
Max Reach outside – right 10 ft (3 m)
Moldboard Height 29 in (74 cm)
Moldboard Thickness 1 in (3 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Cooling System Fluid Capacity 13 gal (48 l)
Fuel Capacity 100 gal (379 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Oil System Fluid Capacity 10 gal (39 l)
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 10,312 lbs (4,677 kg)
Std Operation Weight – Rear Axle 23,898 lbs (10,840 kg)
Std Operation Weight – Total 34,210 lbs (15,517 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Tire Size 14.00 * 24, G-2
Transmission Fluid Capacity 10 gal (39 l)

Steering System

Articulation Angle 22 degrees
Turning Radius 35 ft (11 m)

Transmission

Max Speed – Forward 27 mph (43 kph)
Max Speed – Reverse 19 mph (31 kph)
Transmission Type Powershift
Ask A Question