Contents
Circle
| Blade Tip Angle – Front | 45 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 54 in (137 cm) |
| Max Lift Above Ground | 13 in (33 cm) |
| Max Reach Outside Tires – Left | 77 in (196 cm) |
| Max Reach Outside Tires – Right | 72 in (182 cm) |
| Rotation | 360 degrees |
Dimensions
| Blade Base | 8 ft (2 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Rear Ground Clearance | 2 ft (1 m) |
| Tandem Axle Wheelbase | 5 ft (1 m) |
| Wheelbase | 17 ft (5 m) |
| Width Over Tires | 8 ft (2 m) |
Engine
| Bore | 4 in (10 cm) |
| Displacement | 329 cu in (5,391 cu cm) |
| Gross horsepower | 92 hp (69 kw) |
| Max Power | 92 hp (69 kw) |
| Net Power | 85 hp (63 kw) |
| Net Power Gears 7-8 | 85 hp (63 kw) |
| Net Torque Gears 7-8 | 238 lbs ft (323 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2300 rpm |
| Stroke | 4 in (11 cm) |
| Torque | 238 lbs ft (323 nm) |
| Torque Measured @ | 1300 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 30 degrees |
| Wheel Lean | 20 degrees |
Hydraulic System
| Pump Flow | 27 gpm (102 lpm) |
| Pump Type | Closed-center |
| Relief Valve Pressure | 2000 psi |
Moldboard
| Moldboard Length | 12 ft (4 m) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 31 in (80 cm) |
| Side Shift Right | 27 in (68 cm) |
Operating Specifications
| Operating Voltage | 12 volts |
| Tire Size | 13.00-24 |
Steering System
| Articulation Angle | 22 degrees |
| Turning Radius | 18 ft (5 m) |
Transmission
| Max Speed – Reverse | 7 mph (11 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | Power Shift |
