John Deere 672CH Motor Grader

Circle

Blade Tip Angle – Front 49 degrees
Blade Tip Angle – Rear 5 degrees
Diameter 60 in (152 cm)
Max Lift Above Ground 18 in (44 cm)
Max Reach Outside Tires – Left 85 in (216 cm)
Max Reach Outside Tires – Right 83 in (211 cm)
Rotation 360 degrees
Shift Left 31 in (79 cm)
Shift Right 29 in (73 cm)

Dimensions

Blade Base 9 ft (3 m)
Front Ground Clearance 2 ft (1 m)
Height to Top of Isomount Cab 10 ft (3 m)
Overall Length 28 ft (9 m)
Tandem Axle Wheelbase 5 ft (2 m)
Wheelbase 20 ft (6 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration Turbocharged with Aftercooler
Displacement 414 cu in (6,784 cu cm)
Engine Model 6068H
Max Power 198 hp (148 kw)
Net Power Gear 1-2 145 hp (108 kw)
Net Power Gear 4-6 178 hp (133 kw)
Net Power Gear 5-6 198 hp (148 kw)
Net Power Gears 7-8 198 hp (148 kw)
Net Torque Gears 1-2 554 lbs ft (751 nm)
Net Torque Gears 3-4 611 lbs ft (828 nm)
Net Torque Gears 5-6 625 lbs ft (847 nm)
Net Torque Gears 7-8 625 lbs ft (847 nm)
Number of Cylinders 6
Power Measured @ 2000 rpm
Torque Measured @ 1000 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 32 degrees
Wheel Lean 20 degrees

Hydraulic System

Pump Flow 46 gpm (173 lpm)
Pump Type Closed center variable displacement
Relief Valve Pressure 2550 psi

Moldboard

Blade Pull at Max Weight 39,310 lbs (17,831 kg)
Moldboard Height 24 in (61 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (68 cm)
Side Shift Right 27 in (68 cm)

Operating Specifications

Alternator Supplied Amperage 55 amps
Circle Gearbox Fluid Capacity 4 gal (15 l)
Cooling System Fluid Capacity 11 gal (42 l)
Fuel Capacity 106 gal (401 l)
Hydraulic System Fluid Capacity 16 gal (59 l)
Max Operation Weight – Front Axle 11,180 lbs (5,071 kg)
Max Operation Weight – Rear Axle 25,870 lbs (11,734 kg)
Max Operation Weight – Total 37,050 lbs (16,806 kg)
Oil System Fluid Capacity 6 gal (24 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 10 gal (36 l)
Std Operation Weight – Front Axle 10,060 lbs (4,563 kg)
Std Operation Weight – Rear Axle 22,260 lbs (10,097 kg)
Std Operation Weight – Total 32,320 lbs (14,660 kg)
Tandem Case Fluid Capacity (each) 20 gal (76 l)
Tire Size 13.00-24
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 25 degrees
Turning Radius 23 ft (7 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 25 mph (40 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 8
Transmission Type Power Shift
Ask A Question