Contents
Circle
Blade Tip Angle – Front | 42 degrees |
Blade Tip Angle – Rear | 5 degrees |
Diameter | 60 in (152 cm) |
Max Lift Above Ground | 19 in (47 cm) |
Max Reach Outside Tires – Left | 83 in (210 cm) |
Max Reach Outside Tires – Right | 82 in (208 cm) |
Rotation | 360 degrees |
Shift Left | 31 in (79 cm) |
Shift Right | 29 in (73 cm) |
Dimensions
Blade Base | 9 ft (3 m) |
Front Ground Clearance | 2 ft (1 m) |
Height to Top of Isomount Cab | 11 ft (3 m) |
Overall Length | 29 ft (9 m) |
Tandem Axle Wheelbase | 5 ft (2 m) |
Wheelbase | 20 ft (6 m) |
Width Over Tires | 8 ft (2 m) |
Engine
Aspiration | turbocharged with air-to-air aftercooler |
Displacement | 414 cu in (6,784 cu cm) |
Engine Model | 6068H |
Max Power | 185 hp (138 kw) |
Net Power Gear 1-2 | 165 hp (123 kw) |
Net Power Gear 4-6 | 165 hp (123 kw) |
Net Power Gear 5-6 | 185 hp (138 kw) |
Net Power Gears 7-8 | 185 hp (138 kw) |
Net Torque Gears 1-2 | 554 lbs ft (751 nm) |
Net Torque Gears 3-4 | 611 lbs ft (828 nm) |
Net Torque Gears 5-6 | 625 lbs ft (847 nm) |
Net Torque Gears 7-8 | 625 lbs ft (847 nm) |
Number of Cylinders | 6 |
Power Measured @ | 2000 rpm |
Torque Measured @ | 1000 rpm |
Front Axle
Ground Clearance | 2 ft (1 m) |
Oscillation – Total | 32 degrees |
Wheel Lean | 20 degrees |
Hydraulic System
Pump Flow | 55 gpm (207 lpm) |
Pump Type | Variable-displacement Piston |
Relief Valve Pressure | 2750 psi |
Moldboard
Blade Pull at Max Weight | 42,120 lbs (19,105 kg) |
Moldboard Height | 24 in (61 cm) |
Moldboard Thickness | 1 in (2 cm) |
Moldboard Width | 12 ft (4 m) |
Side Shift Left | 27 in (68 cm) |
Side Shift Right | 27 in (68 cm) |
Operating Specifications
Alternator Supplied Amperage | 100 amps |
Circle Gearbox Fluid Capacity | 2 gal (6 l) |
Cooling System Fluid Capacity | 12 gal (45 l) |
Fuel Capacity | 106 gal (401 l) |
Hydraulic System Fluid Capacity | 14 gal (53 l) |
Max Operation Weight – Total | 46,800 lbs (21,228 kg) |
Operating Voltage | 24 volts |
Rear Diff/Final Drive Fluid Capacity | 10 gal (36 l) |
Std Operation Weight – Front Axle | 9,610 lbs (4,359 kg) |
Std Operation Weight – Rear Axle | 24,020 lbs (10,895 kg) |
Std Operation Weight – Total | 33,630 lbs (15,254 kg) |
Tandem Case Fluid Capacity (each) | 20 gal (76 l) |
Tire Size | 14.00R24 Radial PR |
Transmission Fluid Capacity | 6 gal (23 l) |
Steering System
Articulation Angle | 22 degrees |
Turning Radius | 24 ft (7 m) |
Transmission
Max Speed – Forward | 25 mph (40 kph) |
Max Speed – Reverse | 25 mph (40 kph) |
Number of Gears – Forward | 8 |
Number of Gears – Reverse | 8 |
Transmission Type | Powershift with direct drive |