New Holland F106.6 Motor Grader

Circle

Max Lift Above Ground 16 in (40 cm)
Max Reach Outside Tires – Left 85 in (215 cm)
Max Reach Outside Tires – Right 98 in (249 cm)
Shift Left 28 in (70 cm)
Shift Right 20 in (50 cm)

Dimensions

Blade Base 7 ft (2 m)
Front Ground Clearance 1 ft (0 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Length 29 ft (9 m)
Rear Ground Clearance 1 ft (0 m)
Tandem Axle Wheelbase 4 ft (1 m)
Wheelbase 17 ft (5 m)
Width Over Tires 8 ft (2 m)

Engine

Aspiration turbocharged, water-cooled
Displacement 359 cu in (5,881 cu cm)
Engine Model CNH 4-Stroke Diesel Engine
Max Power 135 hp (101 kw)
Net Power Gear 5-6 135 hp (101 kw)
Number of Cylinders 6
Power Measured @ 2100 rpm

Front Axle

Ground Clearance 2 ft (0 m)
Oscillation – Total 15 degrees
Wheel Lean 22 degrees

Hydraulic System

Pump Flow 25 gpm (95 lpm)
Pump Type Swash Plate, Variable Displacement
Relief Valve Pressure 2900.8 psi

Moldboard

Max Depth of Cut 18 in (45 cm)
Moldboard Height 6 in (15 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 11 ft (3 m)
Side Shift Left 28 in (70 cm)
Side Shift Right 20 in (50 cm)

Operating Specifications

Alternator Supplied Amperage 70 amps
Fuel Capacity 50 gal (189 l)
Hydraulic System Fluid Capacity 45 gal (170 l)
Max Operation Weight – Front Axle 8,378 lbs (3,800 kg)
Max Operation Weight – Rear Axle 18,078 lbs (8,200 kg)
Max Operation Weight – Total 25,353 lbs (11,500 kg)
Oil System Fluid Capacity 3 gal (13 l)
Operating Voltage 24 volts
Std Operation Weight – Front Axle 6,405 lbs (2,905 kg)
Std Operation Weight – Rear Axle 16,369 lbs (7,425 kg)
Std Operation Weight – Total 22,774 lbs (10,330 kg)
Tandem Case Fluid Capacity (each) 20 gal (74 l)
Tire Size 405/70R20
Transmission Fluid Capacity 6 gal (21 l)

Steering System

Articulation Angle 28 degrees
Turning Radius 23,786 ft (7,250 m)

Transmission

Max Speed – Forward 24 mph (38 kph)
Max Speed – Reverse 17 mph (28 kph)
Number of Gears – Forward 6
Number of Gears – Reverse 3
Transmission Type Full Powershift Transmission
Ask A Question