New Holland F170 Motor Grader

Circle

Blade Tip Angle – Front 40 degrees
Blade Tip Angle – Rear 5 degrees
Diameter 69 in (176 cm)
Max Lift Above Ground 18 in (44 cm)
Max Reach Outside Tires – Left 68 in (174 cm)
Max Reach Outside Tires – Right 75 in (190 cm)
Rotation 360 degrees

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Length 28 ft (9 m)
Rear Ground Clearance 2 ft (1 m)
Tandem Axle Wheelbase 5 ft (2 m)
Wheelbase 21 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration turbocharged
Displacement 507 cu in (8,300 cu cm)
Engine Model 6 CTAA 8.3 Tier 2
Net Torque Gears 7-8 170 lbs ft (230 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 19 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 48 gpm (183 lpm)
Pump Type Full Hydraulic Load Sensing
Relief Valve Pressure 2596.2 psi

Moldboard

Blade Down Pressure 20,627 lbs (9,356 kg)
Max Depth of Cut 28 in (71 cm)
Moldboard Height 27 in (67 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 13 ft (4 m)
Side Shift Left 21 in (53 cm)
Side Shift Right 27 in (69 cm)

Operating Specifications

Alternator Supplied Amperage 70 amps
Circle Gearbox Fluid Capacity 1 gal (3 l)
Cooling System Fluid Capacity 11 gal (40 l)
Fuel Capacity 90 gal (340 l)
Hydraulic System Fluid Capacity 25 gal (95 l)
Max Operation Weight – Front Axle 9,370 lbs (4,250 kg)
Max Operation Weight – Rear Axle 22,708 lbs (10,300 kg)
Max Operation Weight – Total 32,077 lbs (14,550 kg)
Oil System Fluid Capacity 5 gal (19 l)
Operating Voltage 24 volts
Tandem Case Fluid Capacity (each) 8 gal (29 l)
Tire Size 13.00 x 24 (12PR)
Transmission Fluid Capacity 5 gal (19 l)

Steering System

Articulation Angle 25 degrees
Turning Radius 24 ft (7 m)

Transmission

Max Speed – Forward 27 mph (43 kph)
Max Speed – Reverse 18 mph (29 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Direct Drive PowerShift
Ask A Question