Contents
Circle
| Blade Tip Angle – Front | 42 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 69 in (176 cm) |
| Max Lift Above Ground | 18 in (45 cm) |
| Max Reach Outside Tires – Left | 78 in (198 cm) |
| Max Reach Outside Tires – Right | 86 in (217 cm) |
| Rotation | 360 degrees |
Dimensions
| Blade Base | 9 ft (3 m) |
| Height to Top of Isomount Cab | 10 ft (3 m) |
| Overall Length | 28 ft (9 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 21 ft (6 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Aspiration | Turbocharged |
| Displacement | 360 cu in (5,901 cu cm) |
| Engine Model | Cummins 6A 5.9 |
| Max Power | 140 hp (104 kw) |
| Net Power Gear 5-6 | 140 hp (104 kw) |
| Net Power Gears 7-8 | 140 hp (104 kw) |
| Net Torque Gears 7-8 | 485 lbs ft (658 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2200 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 20 degrees |
| Wheel Lean | 25 degrees |
Hydraulic System
| Pump Flow | 51 gpm (191 lpm) |
| Pump Type | full hydraulic, load sending, variable displacement piston |
| Relief Valve Pressure | 2600 psi |
Moldboard
| Blade Down Pressure | 14,628 lbs (6,635 kg) |
| Max Depth of Cut | 28 in (71 cm) |
| Moldboard Height | 25 in (62 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 21 in (53 cm) |
| Side Shift Right | 27 in (69 cm) |
Operating Specifications
| Alternator Supplied Amperage | 70 amps |
| Circle Gearbox Fluid Capacity | 1 gal (3 l) |
| Cooling System Fluid Capacity | 11 gal (40 l) |
| Fuel Capacity | 90 gal (341 l) |
| Hydraulic System Fluid Capacity | 48 gal (180 l) |
| Max Operation Weight – Front Axle | 8,157 lbs (3,700 kg) |
| Max Operation Weight – Rear Axle | 21,621 lbs (9,807 kg) |
| Max Operation Weight – Total | 29,776 lbs (13,506 kg) |
| Operating Voltage | 24 volts |
| Rear Diff/Final Drive Fluid Capacity | 8 gal (29 l) |
| Std Operation Weight – Front Axle | 8,157 lbs (3,700 kg) |
| Std Operation Weight – Rear Axle | 21,400 lbs (9,707 kg) |
| Std Operation Weight – Total | 29,776 lbs (13,506 kg) |
| Tandem Case Fluid Capacity (each) | 8 gal (29 l) |
| Tire Size | 14×24 12 ply G2 |
| Transmission Fluid Capacity | 7 gal (25 l) |
Steering System
| Articulation Angle | 25 degrees |
| Turning Radius | 23,786 ft (7,250 m) |
Transmission
| Max Speed – Forward | 27 mph (43 kph) |
| Max Speed – Reverse | 19 mph (30 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | direct drive, power shift |
