Contents
Circle
Diameter | 60 in (151 cm) |
Max Lift Above Ground | 19 in (47 cm) |
Max Reach Outside Tires – Left | 88 in (222 cm) |
Max Reach Outside Tires – Right | 125 in (318 cm) |
Dimensions
Blade Base | 9 ft (3 m) |
Front Ground Clearance | 2 ft (1 m) |
Height to Top of Isomount Cab | 11 ft (3 m) |
Overall Length | 34 ft (10 m) |
Rear Ground Clearance | 2 ft (0 m) |
Tandem Axle Wheelbase | 5 ft (2 m) |
Wheelbase | 20 ft (6 m) |
Width Over Tires | 8 ft (2 m) |
Engine
Aspiration | Turbocharged |
Displacement | 366 cu in (5,998 cu cm) |
Max Power | 185 hp (138 kw) |
Net Power Gear 5-6 | 185 hp (138 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2000 rpm |
Front Axle
Ground Clearance | 2 ft (1 m) |
Oscillation – Total | 15 degrees |
Wheel Lean | 17 degrees |
Hydraulic System
Pump Flow | 26 gpm (99 lpm) |
Pump Type | Axial Piston Pump |
Relief Valve Pressure | 2668.7 psi |
Moldboard
Blade Pull at Max Weight | 21,683 lbs (9,835 kg) |
Moldboard Height | 25 in (63 cm) |
Moldboard Thickness | 1 in (2 cm) |
Moldboard Width | 12 ft (4 m) |
Side Shift Left | 49 in (125 cm) |
Side Shift Right | 49 in (125 cm) |
Operating Specifications
Alternator Supplied Amperage | 55 amps |
Circle Gearbox Fluid Capacity | 2 gal (6 l) |
Cooling System Fluid Capacity | 11 gal (42 l) |
Fuel Capacity | 127 gal (480 l) |
Hydraulic System Fluid Capacity | 45 gal (170 l) |
Operating Voltage | 24 volts |
Std Operation Weight – Front Axle | 11,023 lbs (5,000 kg) |
Std Operation Weight – Rear Axle | 30,203 lbs (13,700 kg) |
Std Operation Weight – Total | 41,227 lbs (18,700 kg) |
Tandem Case Fluid Capacity (each) | 11 gal (42 l) |
Tire Size | 14.00 -24TG |
Transmission Fluid Capacity | 9 gal (34 l) |
Steering System
Articulation Angle | 45 degrees |
Turning Radius | 25 ft (8 m) |
Transmission
Max Speed – Forward | 25 mph (40 kph) |
Max Speed – Reverse | 12 mph (19 kph) |
Number of Gears – Forward | 6 |
Number of Gears – Reverse | 3 |
Transmission Type | Auto Power Shift Tansmission With torque Converter |