Volvo G720 Motor Grader

Circle

Blade Tip Angle – Front 45 degrees
Blade Tip Angle – Rear 6.5 degrees
Max Reach Outside Tires – Left 120 in (305 cm)
Max Reach Outside Tires – Right 120 in (304 cm)
Rotation 360 degrees
Shift Left 31 in (77 cm)
Shift Right 30 in (75 cm)

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 10 ft (3 m)
Overall Length 28 ft (9 m)
Wheelbase 20 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration turbocharged
Displacement 505 cu in (8,271 cu cm)
Engine Model 6C8.3
Max Power 160 hp (119 kw)
Net Power Gears 7-8 160 hp (119 kw)
Net Torque Gears 7-8 560 lbs ft (759 nm)
Number of Cylinders 6

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 51 gpm (191 lpm)
Pump Type load sensing hydraulic
Relief Valve Pressure 2500 psi

Moldboard

Blade Down Pressure 16,717 lbs (7,583 kg)
Blade Pull at Max Weight 7,853 lbs (3,562 kg)
Max Depth of Cut 18 in (44 cm)
Moldboard Height 25 in (63 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Cooling System Fluid Capacity 13 gal (47 l)
Fuel Capacity 102 gal (388 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 9,614 lbs (4,361 kg)
Std Operation Weight – Rear Axle 22,961 lbs (10,415 kg)
Std Operation Weight – Total 32,571 lbs (14,774 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 72 degrees
Turning Radius 26 ft (8 m)

Transmission

Max Speed – Forward 28 mph (46 kph)
Max Speed – Reverse 20 mph (33 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Volvo 8400
Ask A Question