Volvo G726 VHP Motor Grader

Circle

Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 6.5 degrees
Diameter 66 in (168 cm)
Max Lift Above Ground 18 in (44 cm)
Max Reach Outside Tires – Left 80 in (202 cm)
Max Reach Outside Tires – Right 79 in (201 cm)
Rotation 360 degrees
Shift Left 31 in (77 cm)
Shift Right 30 in (75 cm)

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 10 ft (3 m)
Overall Length 28 ft (9 m)
Wheelbase 20 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration turbocharged
Displacement 505 cu in (8,267 cu cm)
Engine Model 6C8.3
Max Power 195 hp (145 kw)
Net Power Gears 7-8 195 hp (145 kw)
Net Torque Gears 7-8 636 lbs ft (862 nm)
Number of Cylinders 6

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 15 degrees

Hydraulic System

Pump Flow 51 gpm (191 lpm)
Pump Type load sensing hydraulic
Relief Valve Pressure 2500 psi

Moldboard

Blade Down Pressure 17,403 lbs (7,894 kg)
Blade Pull at Max Weight 21,189 lbs (9,611 kg)
Max Depth of Cut 32 in (81 cm)
Moldboard Height 25 in (63 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Alternator Supplied Amperage 75 amps
Cooling System Fluid Capacity 13 gal (47 l)
Fuel Capacity 100 gal (379 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Operating Voltage 12 volts
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 10,007 lbs (4,539 kg)
Std Operation Weight – Rear Axle 23,543 lbs (10,679 kg)
Std Operation Weight – Total 33,550 lbs (15,218 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Tire Size 14.00 x 24, G-2
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 22 degrees

Transmission

Max Speed – Forward 29 mph (46 kph)
Max Speed – Reverse 20 mph (33 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Powershift
Ask A Question