Volvo G726B Motor Grader

Circle

Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 6.5 degrees
Diameter 66 in (168 cm)
Max Lift Above Ground 18 in (44 cm)
Max Reach Outside Tires – Left 80 in (202 cm)
Max Reach Outside Tires – Right 79 in (201 cm)
Rotation 360 degrees
Shift Left 31 in (77 cm)
Shift Right 30 in (75 cm)

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 10 ft (3 m)
Overall Length 30 ft (9 m)
Wheelbase 20 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration Turbocharged
Displacement 436 cu in (7,145 cu cm)
Engine Model D7DGDE2
Max Power 235 hp (175 kw)
Net Power Gears 7-8 235 hp (175 kw)
Net Torque Gears 7-8 774 lbs ft (1,049 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1400 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 15 degrees

Hydraulic System

Pump Flow 75 gpm (284 lpm)
Pump Type load sensing hydraulic
Relief Valve Pressure 391.7 psi

Moldboard

Blade Down Pressure 17,854 lbs (8,098 kg)
Blade Pull at Max Weight 22,621 lbs (10,261 kg)
Max Depth of Cut 32 in (81 cm)
Moldboard Height 25 in (63 cm)
Moldboard Thickness 1 in (2 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 7 gal (28 l)
Fuel Capacity 100 gal (379 l)
Hydraulic System Fluid Capacity 35 gal (134 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 10,267 lbs (4,657 kg)
Std Operation Weight – Rear Axle 25,135 lbs (11,401 kg)
Std Operation Weight – Total 35,400 lbs (16,057 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Tire Size 14.00 x 24, G-2
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 22 degrees

Transmission

Max Speed – Forward 29 mph (46 kph)
Max Speed – Reverse 20 mph (33 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Powershift
Ask A Question