Volvo G740 VHP Motor Grader

Circle

Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 2.5 degrees
Diameter 66 in (168 cm)
Max Lift Above Ground 17 in (44 cm)
Max Reach Outside Tires – Left 80 in (202 cm)
Max Reach Outside Tires – Right 79 in (201 cm)
Rotation 360 degrees
Shift Left 31 in (77 cm)
Shift Right 30 in (75 cm)

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 10 ft (3 m)
Overall Length 28 ft (9 m)
Wheelbase 21 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration Turbocharged
Displacement 659 cu in (10,801 cu cm)
Engine Model M11
Max Power 235 hp (175 kw)
Net Power Gears 7-8 235 hp (175 kw)
Net Torque Gears 7-8 845 lbs ft (1,146 nm)
Power Measured @ 2100 rpm
Torque Measured @ 1300 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 48 gpm (183 lpm)
Pump Type load sensing hydraulic
Relief Valve Pressure 2500 psi

Moldboard

Blade Down Pressure 18,904 lbs (8,575 kg)
Blade Pull at Max Weight 22,424 lbs (10,171 kg)
Max Depth of Cut 32 in (80 cm)
Moldboard Height 29 in (74 cm)
Moldboard Thickness 1 in (3 cm)
Moldboard Width 15 ft (5 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Alternator Supplied Amperage 75 amps
Cooling System Fluid Capacity 13 gal (50 l)
Fuel Capacity 100 gal (379 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 10,695 lbs (4,851 kg)
Std Operation Weight – Rear Axle 24,917 lbs (11,302 kg)
Std Operation Weight – Total 35,611 lbs (16,153 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Tire Size 14.00 x 24, G-2
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 22 degrees

Transmission

Max Speed – Forward 27 mph (44 kph)
Max Speed – Reverse 20 mph (31 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Powershift
Ask A Question