Volvo G740B Motor Grader

Circle

Blade Tip Angle – Front 44 degrees
Blade Tip Angle – Rear 6.5 degrees
Diameter 66 in (168 cm)
Max Lift Above Ground 17 in (44 cm)
Max Reach Outside Tires – Left 80 in (202 cm)
Max Reach Outside Tires – Right 79 in (201 cm)
Rotation 360 degrees
Shift Left 31 in (77 cm)
Shift Right 30 in (75 cm)

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 10 ft (3 m)
Overall Length 30 ft (9 m)
Wheelbase 21 ft (6 m)
Width Over Tires 8 ft (3 m)

Engine

Aspiration Turbocharged
Displacement 586 cu in (9,603 cu cm)
Engine Model D10BGAE2
Max Power 243 hp (181 kw)
Net Power Gears 7-8 243 hp (181 kw)
Net Torque Gears 7-8 846 lbs ft (1,147 nm)
Number of Cylinders 6
Power Measured @ 2200 rpm
Torque Measured @ 1100 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 75 gpm (284 lpm)
Pump Type load sensing hydraulic
Relief Valve Pressure 2700 psi

Moldboard

Blade Down Pressure 19,711 lbs (8,941 kg)
Blade Pull at Max Weight 22,089 lbs (10,019 kg)
Max Depth of Cut 32 in (81 cm)
Moldboard Height 29 in (74 cm)
Moldboard Thickness 1 in (3 cm)
Moldboard Width 12 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Alternator Supplied Amperage 75 amps
Cooling System Fluid Capacity 13 gal (50 l)
Fuel Capacity 120 gal (454 l)
Hydraulic System Fluid Capacity 35 gal (134 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 6 gal (23 l)
Std Operation Weight – Front Axle 11,138 lbs (5,052 kg)
Std Operation Weight – Rear Axle 25,988 lbs (11,788 kg)
Std Operation Weight – Total 37,126 lbs (16,840 kg)
Tandem Case Fluid Capacity (each) 27 gal (100 l)
Tire Size 14.00 x 24, G-2
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 22 degrees

Transmission

Max Speed – Forward 27 mph (44 kph)
Max Speed – Reverse 20 mph (31 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Powershift
Ask A Question