Volvo G780 VHP Motor Grader

Circle

Blade Tip Angle – Front 46 degrees
Blade Tip Angle – Rear 13 degrees
Diameter 67 in (169 cm)
Max Lift Above Ground 17 in (43 cm)
Max Reach Outside Tires – Left 91 in (231 cm)
Max Reach Outside Tires – Right 91 in (230 cm)
Rotation 360 degrees
Shift Left 30 in (76 cm)
Shift Right 30 in (75 cm)

Dimensions

Blade Base 9 ft (3 m)
Height to Top of Isomount Cab 11 ft (3 m)
Overall Length 29 ft (9 m)
Wheelbase 21 ft (6 m)
Width Over Tires 9 ft (3 m)

Engine

Aspiration Turbocharged
Displacement 659 cu in (10,801 cu cm)
Engine Model M11
Max Power 235 hp (175 kw)
Net Power Gears 7-8 235 hp (175 kw)
Net Torque Gears 7-8 845 lbs ft (1,146 nm)
Power Measured @ 2100 rpm
Torque Measured @ 1300 rpm

Front Axle

Ground Clearance 2 ft (1 m)
Oscillation – Total 16 degrees
Wheel Lean 18 degrees

Hydraulic System

Pump Flow 48 gpm (183 lpm)
Pump Type load sensing hydraulic
Relief Valve Pressure 2500 psi

Moldboard

Blade Down Pressure 23,485 lbs (10,653 kg)
Blade Pull at Max Weight 26,507 lbs (12,023 kg)
Max Depth of Cut 33 in (84 cm)
Moldboard Height 31 in (79 cm)
Moldboard Thickness 1 in (3 cm)
Moldboard Width 14 ft (4 m)
Side Shift Left 27 in (67 cm)
Side Shift Right 27 in (67 cm)

Operating Specifications

Alternator Supplied Amperage 75 amps
Cooling System Fluid Capacity 13 gal (50 l)
Fuel Capacity 100 gal (379 l)
Hydraulic System Fluid Capacity 24 gal (90 l)
Operating Voltage 24 volts
Rear Diff/Final Drive Fluid Capacity 9 gal (34 l)
Std Operation Weight – Front Axle 13,290 lbs (6,028 kg)
Std Operation Weight – Rear Axle 29,454 lbs (13,360 kg)
Std Operation Weight – Total 42,743 lbs (19,388 kg)
Tandem Case Fluid Capacity (each) 28 gal (105 l)
Tire Size 16.00 x 24, G-2
Transmission Fluid Capacity 10 gal (38 l)

Steering System

Articulation Angle 22 degrees

Transmission

Max Speed – Forward 24 mph (38 kph)
Max Speed – Reverse 17 mph (27 kph)
Number of Gears – Forward 8
Number of Gears – Reverse 4
Transmission Type Powershift
Ask A Question