Contents
Circle
| Blade Tip Angle – Front | 45 degrees |
| Blade Tip Angle – Rear | 6 degrees |
| Diameter | 64 in (163 cm) |
| Max Reach Outside Tires – Left | 78 in (198 cm) |
| Max Reach Outside Tires – Right | 77 in (196 cm) |
| Rotation | 360 degrees |
| Shift Left | 31 in (77 cm) |
| Shift Right | 30 in (75 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Overall Length | 31 ft (9 m) |
| Wheelbase | 21 ft (7 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Aspiration | Turbocharged, Aftercooled |
| Displacement | 573 cu in (9,390 cu cm) |
| Engine Model | D9B |
| Max Power | 262 hp (195 kw) |
| Net Power Gears 7-8 | 262 hp (195 kw) |
| Net Torque Gears 7-8 | 876 lbs ft (1,188 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 1700 rpm |
| Torque Measured @ | 1550 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 16 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 55 gpm (208 lpm) |
| Pump Type | Axial piston pump |
| Relief Valve Pressure | 3000 psi |
Moldboard
| Blade Down Pressure | 20,420 lbs (9,262 kg) |
| Blade Pull at Max Weight | 30,690 lbs (13,921 kg) |
| Max Depth of Cut | 31 in (77 cm) |
| Moldboard Height | 29 in (74 cm) |
| Moldboard Thickness | 1 in (3 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 27 in (67 cm) |
| Side Shift Right | 27 in (67 cm) |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 12 gal (47 l) |
| Fuel Capacity | 132 gal (500 l) |
| Hydraulic System Fluid Capacity | 24 gal (91 l) |
| Max Operation Weight – Front Axle | 18,500 lbs (8,391 kg) |
| Max Operation Weight – Rear Axle | 34,100 lbs (15,468 kg) |
| Max Operation Weight – Total | 50,000 lbs (22,680 kg) |
| Oil System Fluid Capacity | 10 gal (39 l) |
| Operating Voltage | 24 volts |
| Std Operation Weight – Front Axle | 11,680 lbs (5,298 kg) |
| Std Operation Weight – Rear Axle | 29,980 lbs (13,599 kg) |
| Std Operation Weight – Total | 41,660 lbs (18,897 kg) |
| Tandem Case Fluid Capacity (each) | 26 gal (100 l) |
| Tire Size | 14:00 x 24, G-2 |
| Transmission Fluid Capacity | 16 gal (61 l) |
Steering System
| Articulation Angle | 21 degrees |
| Turning Radius | 25 ft (8 m) |
Transmission
| Max Speed – Forward | 27 mph (44 kph) |
| Max Speed – Reverse | 19 mph (31 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | HTE 840, Fully sequential, direct drive, Volvo powershift transmission |
