Contents
Bowl
Heaped Capacity | 26 cu yd (20 cu m) |
Struck Capacity | 18 cu yd (14 cu m) |
Width of Cut | 10 ft (3 m) |
Dimensions
Axle to Vertical Hitch Pin | 17 in (43 cm) |
Bail Length – Maximum (Push-Pull) | 60 in (152 cm) |
Extended Push Block (Push-Pull) | 110 in (279 cm) |
Front of Tractor to Front Axle | 11 in (27 cm) |
Ground Clearance – Tractor | 2 in (5 cm) |
Height – Overall Shipping | 146 in (371 cm) |
Height – Scraper Blade Maximum | 21 in (53 cm) |
Height – Top of Cab | 11 ft (3 m) |
Length – Overall Machine | 507 in (1,288 cm) |
Overall Height | 12 ft (4 m) |
Overall Length | 42 ft (13 m) |
Overall Width | 11 ft (3 m) |
Rear Axle – Rear of Machine | 85 in (216 cm) |
Wheel Base | 25 ft (8 m) |
Width – Inside of Bowl | 116 in (295 cm) |
Width – Outside Rear Tires | 120 in (305 cm) |
Width – Overall Machine | 136 in (345 cm) |
Width – Rear Tire Center Lines | 87 in (221 cm) |
Width – Tractor | 117 in (297 cm) |
Engine
Scraper Engine | 3306 |
Tractor Engine | 3306 / 3406C |
Hydraulic System
Apron Cylinder Bore | 7 in (19 cm) |
Apron Cylinder Stroke | 24 in (61 cm) |
Bowl Cylinder Bore | 6 in (15 cm) |
Bowl Cylinder Stroke | 32 in (81 cm) |
Cushion Hitch Circuit | 9 gpm (35 lpm) |
Ejector Cylinder Bore | 7 in (17 cm) |
Ejector Cylinder Stroke | 61 in (155 cm) |
Relief Valve – Implement Circuit | 2150 psi |
Relief Valve – Steering Circuit | 2250 psi |
Scraper Circuit | 66 gpm (248 lpm) |
Secondary Steering Circuit | 37 gpm (140 lpm) |
Steering Circuit | 52 gpm (197 lpm) |
Operating Specifications
Fuel Capacity | 262 gal (992 l) |
Hydraulic System Fluid Capacity | 37 gal (140 l) |
Tire Size | 33.25-R29 MX XRB 2 |
Scraper Bowl
Apron Closure Force | 24,075 lbs (10,920 kg) |
Apron Opening | 70 in (178 cm) |
Capacity – Struck | 14 cu yd (11 cu m) |
Cutting Edge Thickness | 1 in (3 cm) |
Depth of Cut – Maximum | 13 in (33 cm) |
Depth of Spread – Maximum | 21 in (52 cm) |
Ground Clearance – Maximum | 21 in (52 cm) |
Hyd. Penetration Force – 621G | 48,375 lbs (21,943 kg) |
Rated Load | 48,000 lbs (21,772 kg) |
Scraper Capacity – Heaped | 20 cu yd (15 cu m) |
Width – Cut – To Router Bits | 119 in (302 cm) |
Scraper Engine
Bore | 5 in (12 cm) |
Displacement | 638 cu in (10,455 cu cm) |
Gross Power | 246 hp (183 kw) |
Gross Power – Gear 1 | 246 hp (183 kw) |
Make | Caterpillar |
Model | 3306 |
Net Power – Gear 1 | 225 hp (168 kw) |
Power Measured @ | 2200 rpm |
Stroke | 6 in (15 cm) |
Service Refill Capacities – Tractor
Cooling System | 22 gal (83 l) |
Crankcase | 10 gal (36 l) |
Differential | 43 gal (163 l) |
Final Drive – Each | 5 gal (19 l) |
Hydraulic Reservoir | 37 gal (140 l) |
Transmission | 19 gal (72 l) |
Wheel Coolant – Each | 12 gal (45 l) |
Steering System
Steering Angle – Left | 85 degrees |
Steering Angle – Right | 90 degrees |
Width – 180 degrees Turn | 36 ft (11 m) |
Tractor Engine
Bore | 5 in (14 cm) |
Caterpillar Net Power | 330 hp (246 kw) |
Displacement | 893 cu in (14,634 cu cm) |
EEC 80/1269 | 330 hp (246 kw) |
Gross Power | 347 hp (259 kw) |
ISO 9249 | 330 hp (246 kw) |
Net Power | 327 hp (244 kw) |
Net Power – Gears 1-2 | 330 hp (246 kw) |
SAE J1349 | 327 hp (244 kw) |
Stroke | 7 in (17 cm) |
Transmission
1 Forward | 3 mph (5 kph) |
2 Forward | 6 mph (9 kph) |
3 Forward | 7 mph (11 kph) |
4 Forward | 10 mph (15 kph) |
5 Forward | 13 mph (21 kph) |
6 Forward | 18 mph (28 kph) |
7 Forward | 24 mph (38 kph) |
8 Forward | 32 mph (51 kph) |
Number of Forward Gears | 8 |
Number of Reverse Gears | 1 |
Reverse | 6 mph (9 kph) |
Weights
Operating Weight | 84,050 lbs (38,124 kg) |
Total Operating – Loaded | 80,599 lbs (36,559 kg) |
Weights – Standard, Tandem
Front Axle | 49,590 lbs (22,494 kg) |
Front Axle Weight – Loaded | 64,708 lbs (29,351 kg) |
Rear Axle | 34,460 lbs (15,631 kg) |
Rear Axle – Weight – Loaded | 67,350 lbs (30,549 kg) |
Scraper Shipping | 32,669 lbs (14,818 kg) |
Total Operating – Empty | 84,050 lbs (38,124 kg) |
Total Operating – Loaded | 132,057 lbs (59,900 kg) |
Total Shipping | 83,768 lbs (37,997 kg) |
Tractor Shipping | 51,098 lbs (23,178 kg) |