Case 1825B Skid Steer Loader

Dimensions

Angle of departure 31 degrees
Ground Clearance 7 in (17 cm)
Height – Top of ROPS/FOPS 70 in (178 cm)
Hinge pin height – fully raised 98 in (249 cm)
Length w/o Bucket 9 ft (3 m)
Wheelbase 3 ft (1 m)
Width Over Tires 3 ft (1 m)

Engine

Bore 3 in (8 cm)
Displacement 92 cu in (1,501 cu cm)
Engine Make Kubota
Engine Model V1505
Gross Power 27 hp (20 kw)
Max Torque 67 lbs ft (91 nm)
Number of Cylinders 4
Power Measured @ 2400 rpm
Stroke 3 in (8 cm)
Torque Measured @ 2100 rpm

Hydraulic

Dump Time 1.2 seconds
Lower Time 2.5 seconds
Pump Flow Capacity 10 gpm (36 lpm)
Pump Type Gear pump driven directl
Relief Valve Pressure 2300 psi

Loader

Bucket Width 49 in (124 cm)
Operating Load Rating 884 lbs (401 kg)

Operational

Alternator Supplied Amperage 30 amps
Chain Box Fluid Capacity – each side 1 gal (3 l)
Engine Oil Fluid Capacity 2 gal (6 l)
Fuel Capacity 9 gal (33 l)
Hydraulic System Fluid Capacity 6 gal (22 l)
Max Speed 6 mph (9 kph)
Operating Voltage 12 volts
Operational Weight 3,106 lbs (1,409 kg)
Tire Size 5.70 x 15, 4PR
Ask A Question