Caterpillar 216B II Skid Steer Loader

Cab

FOPS SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II SAE J231 JAN81, ISO 3449:1992 Level II
ROPS SAE J1040 MAY94, ISO 3471:1994

Dimensions

Bucket Pin Height – Carry Position 9 in (24 cm)
Bucket Pin Height – Maximum Lift 9 ft (3 m)
Bumper Overhang – Rear Axle 38 in (97 cm)
Clearance at Max Lift and Dump 7 ft (2 m)
Clearance at Maximum Lift and Dump 85 in (216 cm)
Departure Angle 26 degrees
Ground Clearance 8 in (20 cm)
Height – Top of Cab 7 ft (2 m)
Length – With Bucket on Ground 127 in (323 cm)
Length – Without Bucket 99 in (251 cm)
Length w/o Bucket 8 ft (3 m)
Length with Bucket 11 ft (3 m)
Maximum Dump Angle 40 degrees
Maximum Overall Height 146 in (371 cm)
Maximum Reach – With Arms Parallel 50 in (128 cm)
Rack Back Angle – Maximum Height 96.7 degrees
Reach – Maximum Lift/Dump 20 in (51 cm)
Reach at Max Lift and Dump 20 in (51 cm)
Turn Radius from Center – Bucket 76 in (194 cm)
Turn Radius from Center – Coupler 47 in (120 cm)
Turn Radius from Center – Rear 59 in (149 cm)
Turning Radius from Center – inc bucket 76 in (194 cm)
Turning Radius from Center – machine rear 59 in (149 cm)
Vehicle Width over Tires 60 in (152 cm)
Wheel Base 3 ft (1 m)
Wheelbase 3 ft (1 m)
Width Over Tires 5 ft (2 m)

Engine

Bore 3 in (8 cm)
Displacement 134 cu in (2,196 cu cm)
Engine Make Caterpillar
Engine Model Cat C2.2
Gross Power – SAE J1995 51 hp (38 kw)
Net Flywheel Power 47 hp (35 kw)
Net Power – SAE 1349 47 hp (35 kw)
Stroke 4 in (10 cm)

Hydraulic System

Hydraulic Flow Standard
Hydraulic Power 30 hp (23 kw)
Loader Hydraulic Flow 16 gpm (59 lpm)
Loader Hydraulic Pressure 3335 psi
Pump Flow Capacity 16 gpm (59 lpm)
Relief Valve Pressure 3335 psi

Loader

Breakout Force 4083 psi
Operating Load Rating 1,400 lbs (635 kg)
Tipping Angle 2800 degrees

Operating Specifications

Breakout Force – Tilt Cylinder 4,083 lbs (1,852 kg)
Chain Box Fluid Capacity – each side 2 gal (6 l)
Cooling System Fluid Capacity 3 gal (10 l)
Engine Oil Fluid Capacity 3 gal (10 l)
Fuel Capacity 15 gal (58 l)
Hydraulic System Fluid Capacity 15 gal (55 l)
Max Speed 7 mph (11 kph)
Operational Weight 5,609 lbs (2,544 kg)
Rated Operating Capacity 1,400 lbs (635 kg)
Rated Operating Capacity with Optional Counterweight 1,500 lbs (680 kg)
Tipping Load 2,800 lbs (1,270 kg)

Power Train

Travel Speed Forward 7 mph (11 kph)
Travel Speed Reverse 7 mph (11 kph)

Service Refill Capacities

Chain Box – Each Side 2 gal (6 l)
Cooling System 3 gal (10 l)
Engine Crankcase 3 gal (10 l)
Fuel Tank 15 gal (58 l)
Hydraulic System 15 gal (55 l)
Hydraulic Tank 9 gal (35 l)

Weights

Operating Weight 5,609 lbs (2,544 kg)
Ask A Question