Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 8 in (21 cm) |
| Bucket Pin Height – Maximum Lift | 10 ft (3 m) |
| Bumper Overhang – Rear Axle | 41 in (104 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 94 in (239 cm) |
| Departure Angle | 28 degrees |
| Ground Clearance | 9 in (24 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – With Bucket on Ground | 138 in (351 cm) |
| Length – Without Bucket | 110 in (279 cm) |
| Length w/o Bucket | 9 ft (3 m) |
| Length with Bucket | 12 ft (4 m) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 156 in (396 cm) |
| Maximum Reach – With Arms Parallel | 53 in (135 cm) |
| Rack Back Angle – Maximum Height | 83 degrees |
| Reach – Maximum Lift/Dump | 21 in (53 cm) |
| Reach at Max Lift and Dump | 21 in (54 cm) |
| Turn Radius from Center – Bucket | 82 in (208 cm) |
| Turn Radius from Center – Coupler | 52 in (132 cm) |
| Turn Radius from Center – Rear | 64 in (163 cm) |
| Turning Radius from Center – inc bucket | 82 in (209 cm) |
| Turning Radius from Center – machine rear | 64 in (162 cm) |
| Vehicle Width over Tires | 66 in (168 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 6 ft (2 m) |
Engine
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat C3.4 DIT |
| Gross Power – SAE J1995 | 74 hp (55 kw) |
| Net Flywheel Power | 71 hp (53 kw) |
| Net Power – ISO 9249 EEC | 71 hp (53 kw) |
| Net Power – SAE 1349 | 71 hp (53 kw) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow | Standard |
| Hydraulic Power | 43 hp (32 kw) |
| Loader Hydraulic Flow | 22 gpm (83 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Pump Flow Capacity | 22 gpm (83 lpm) |
| Relief Valve Pressure | 3335 psi |
Loader
| Breakout Force | 5484 psi |
| Operating Load Rating | 1,950 lbs (885 kg) |
| Operating Width | 66 in (168 cm) |
| Tipping Angle | 3900 degrees |
Operating Specifications
| Alternator Supplied Amperage | 90 amps |
| Breakout Force – Tilt Cylinder | 5,484 lbs (2,488 kg) |
| Chain Box Fluid Capacity – each side | 2 gal (7 l) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Fluid Capacity | 2 gal (9 l) |
| Fuel Capacity | 24 gal (90 l) |
| Hydraulic System Fluid Capacity | 14 gal (52 l) |
| Max Speed | 11 mph (18 kph) |
| Operating Speed | 8 mph (12 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 7,007 lbs (3,178 kg) |
| Rated Operating Capacity | 1,950 lbs (885 kg) |
| Rated Operating Capacity with Optional Counterweight | 2,050 lbs (930 kg) |
| Tipping Load | 3,900 lbs (1,769 kg) |
Power Train
| Travel Speed Forward | 8 mph (12 kph) |
| Travel Speed Forward – 2-Speed Option | 11 mph (18 kph) |
| Travel Speed Reverse | 8 mph (12 kph) |
| Travel Speed Reverse – 2-Speed Option | 11 mph (18 kph) |
Service Refill Capacities
| Chain Box – Each Side | 2 gal (7 l) |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 2 gal (9 l) |
| Fuel Tank | 24 gal (90 l) |
| Hydraulic System | 14 gal (52 l) |
| Hydraulic Tank | 9 gal (35 l) |
Weights
| Operating Weight | 7,007 lbs (3,178 kg) |
