Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 8 in (21 cm) |
| Bucket Pin Height – Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 14 in (35 cm) |
| Bumper Overhang – Rear Axle | 41 in (104 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 95 in (241 cm) |
| Departure Angle | 26.4 degrees |
| Ground Clearance | 8 in (20 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – With Bucket on Ground | 142 in (361 cm) |
| Length – Without Bucket | 114 in (290 cm) |
| Length w/o Bucket | 10 ft (3 m) |
| Length with Bucket | 12 ft (4 m) |
| Maximum Dump Angle | 51 degrees |
| Maximum Overall Height | 160 in (406 cm) |
| Maximum Reach – With Arms Parallel | 52 in (132 cm) |
| Rack Back Angle – Maximum Height | 87 degrees |
| Reach – Maximum Lift/Dump | 33 in (84 cm) |
| Reach at Max Lift and Dump | 33 in (83 cm) |
| Turn Radius from Center – Bucket | 86 in (218 cm) |
| Turn Radius from Center – Coupler | 52 in (132 cm) |
| Turn Radius from Center – Rear | 67 in (170 cm) |
| Turning Radius from Center – inc bucket | 86 in (218 cm) |
| Turning Radius from Center – machine rear | 67 in (170 cm) |
| Vehicle Width over Tires | 72 in (183 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 6 ft (2 m) |
Engine
| Bore | 4 in (9 cm) |
| Displacement | 201 cu in (3,294 cu cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat C3.4 DIT |
| Gross Power – SAE J1995 | 75 hp (56 kw) |
| Net Flywheel Power | 71 hp (53 kw) |
| Net Power – SAE 1349 | 71 hp (53 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2600 rpm |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow | Standard |
| Hydraulic Power | 43 hp (32 kw) |
| Loader Hydraulic Flow | 22 gpm (83 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Pump Flow Capacity | 22 gpm (83 lpm) |
| Relief Valve Pressure | 3335 psi |
Loader
| Breakout Force | 5508 psi |
| Bucket Capacity | 1 cu yd (0 cu m) |
| Operating Load Rating | 2,500 lbs (1,134 kg) |
| Tipping Angle | 5501 degrees |
Operating Specifications
| Alternator Supplied Amperage | 90 amps |
| Breakout Force – Tilt Cylinder | 5,508 lbs (2,498 kg) |
| Chain Box Fluid Capacity – each side | 2 gal (8 l) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 24 gal (90 l) |
| Hydraulic System Fluid Capacity | 14 gal (53 l) |
| Max Speed | 7 mph (11 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 7,861 lbs (3,566 kg) |
| Rated Operating Capacity | 2,500 lbs (1,134 kg) |
| Rated Operating Capacity with Optional Counterweight | 2,550 lbs (1,157 kg) |
| Tipping Load | 5,000 lbs (2,268 kg) |
Power Train
| Travel Speed Forward | 7 mph (11 kph) |
| Travel Speed Forward – 2-Speed Option | 11 mph (18 kph) |
| Travel Speed Reverse | 7 mph (11 kph) |
| Travel Speed Reverse – 2-Speed Option | 11 mph (18 kph) |
Service Refill Capacities
| Chain Box – Each Side | 2 gal (8 l) |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 2 gal (9 l) |
| Fuel Tank | 24 gal (90 l) |
| Hydraulic System | 14 gal (53 l) |
| Hydraulic Tank | 9 gal (35 l) |
Weights
| Operating Weight | 7,861 lbs (3,566 kg) |
