JCB 210 Skid Steer Loader

Capacities

Engine coolant 3 gal (10 l)
Engine Oil 2 gal (8 l)
Fuel Tank 24 gal (92 l)
Hydraulic system 12 gal (44 l)

Dimensions

Angle of departure 25 degrees
Bucket corner Turning radius 7 ft (2 m)
Dig Depth 394 in (1,000 cm)
Dump angle 42 degrees
Dump Height 8 ft (2 m)
Ground Clearance 8 in (21 cm)
Loadover height 9,318 ft (2,840 m)
Max. reach @ full height 4 ft (1 m)
Overall height 7 ft (2 m)
Overall Length 138 in (349 cm)
Pin height 10 ft (3 m)
Quick hitch Turning radius 4 ft (1 m)
Reach @ ground level 4 ft (1 m)
Rear chassis turning radius 6 ft (2 m)
Rollback – Ground Level 30 degrees
Wheelbase 4 ft (1 m)
Width over tires 60 in (152 cm)

Engine

Alternator 100 amps
Aspiration Turbo
Battery 12 V
Cooling system Diesel
Displacement 2,482 cu in (40,673 cu cm)
Emissions Certification EPA-T4F (EU St3B)
Engine Model Kohler – KDI2504TCR/26A
Engine oil service interval 500 hours
Fuel Diesel
Gross Power 74 hp (55 kw)
Hydraulically driven cooling fan Yes
Max Torque 221 lbs ft (300 nm)
Power Measured @ 2400 rpm
Starter Motor 2 hp (1 kw)
Torque Measured @ 1200 rpm

Hydraulic System

Pump Flow Capacity 19 gpm (70 lpm)
Relief Valve Pressure 483.8 psi

Loader

Breakout Force 3,964 lbs (1,798 kg)
Bucket Capacity 1 cu yd (0 cu m)
Bucket Width 66 in (168 cm)
Loader lift capacity with bucket 4,132 lbs (1,874 kg)
Operating Load Rating 2,114 lbs (959 kg)
Operating Width 65 in (165 cm)
Tipping load – no counterweight 4,229 lbs (1,918 kg)

Operating Specifications

Operational Weight 6,885 lbs (3,123 kg)

Tires

Standard 10 x 16.5 – 8 PR Xtra Wall Off Road

Transmission

Model Single Speed
Travel Speed 8 mph (12 kph)
Ask A Question